RC10Talk - The Net's Largest Vintage R/C Community

I might just have to get those rims. Really was wanting black dish rims, but good luck on that. I think the DE bearing rims will work but nothing with the right backspacing for the rears. Ever run those sets of Worlds Re-re on a B2 or B3? I think those are the only two option out there right now.

I was thinking regular B2 arms and linkage would work on a T2. As I am searching for wheels for my B3, which is a a struggle, probably will skip my original idea. Would be easier just to build a B4 with aluminum chassis.

Well I might have to look for a new project unless I come up with a cheap T2 experiment with. I have a buddy with a small CNC mill that might be able to mod a nose plated. But sounds like the rear suspension is the problem, which I was not expecting.

JWSCAB, when you say regular buggy plate, are you referring to a regular RC10 (GEN 1) nose plate. I guess what I am wanting to do is set up the front with better geometry and longer arms. I just picked up a very nice B3 Factory Team, and really like the handling. However, I am reluctant to bash with...

I was wondering if anyone has ever converted a T2 to a B2/B3. I like the aluminum tub on the T2 and thought it would be interesting to make A B2 on an aluminum tub by swapping out the front nose plates. I would have to figure out some nose bracing but that should be doable. Everything else should be...

Tamlok, thanks for the info. Thats exactly what I was looking for! I see what you are talking about by the spacing. On the short course rims I’m guessing I need the 3mm offset rims? I’m putting together a parts list for an order tomorrow. Figured I would service the trans and shocks while I was at i...

Woking on a winter project being a B4.2. Looking to make it primarily into a "basher' for the back yard and gravel pit. I would like to get a bit more ground clearance by using some 2.2 truck tires and wheels. For anyone who has done this will I need to change out the rear and/or front axels to...

Just snagged a JConcepts B4 body off eBay tonight. Like the lines of the Illuzion body compared to the standard body. Thinking a viper green with black fin and wheels.

Thanks for the replies. I’ve looked on eBay and the only thing I’m finding right now is some guy in the UK selling reproduction bodies. It’s winter so I have some time.

Dug out my sons B4.2 this weekend. Switched out the stock motor and electronic speed controller for an extra Novak combo I had sitting around. I would like to get a new body for this. Anyone have a line on bodies for this thing. The pre painted body is beat. Am I correct in understanding the B4 and ...

Turns out it's just a bushing sport truck so will need some upgrading as far as bearings go. Anyone put together a "kit" for these including the stealth trans? Truck is in really good shape with no broken parts. All I really will have to do is clean it up and upgrade a few parts. It is bon...

Here's a pic of my re-re worlds. Derrick (Drub69) hooked me up with one of his wide bumpers. Haven't messed with it much more than that, can't seem to find too much time. Took it for it's maiden basher run. Was a little wet and muddy but I was itching to try out the bumper, which worked great. I am ...

Like it says I ended up getting this rig off eBay for 79 shipped. Seemed like a good deal. I will have to strip out the old electronics or just run old school not sure yet. My guess is a later 7035 kit with the all black arms and shock towers. I was doing the math and by the time I cobbled all the p...

Regarding parts compatibility, could I pick up a GT roller and pretty much swap out most of the parts to my B chassis? Seems to me the Gt's are cheaper to pick up than the RC10T's, generally speaking. A-arms, shocks and the like should all be the same right?

Need to find myself a RC10T nose plate now, without breaking the bank. Will the GT nose plate work as well? As long as it's not bent up I could care a less what color.