First and foremost, a HUGE shoutout and appreciation to Larry Doe for helping me make this dream a reality. Larry was kind enough to bring my car down with him for the IFMAR worlds this past week at Hobby Action Raceway in Chandler, AZ for me to...
Here goes my first XX4 build. I recently bought Shoman24v's beautiful XX4. I have long since admired this build, and could not resist the chance to own it. It is a nearly all new build.
However, after I received it I decided it had to have all the...
Last post
the only thing with the older buggy, is to work on them it a lot longer then the new buggy
I built this XX4 for a friend. I wasn't too concerned about having era correct equipment, but I loosely based it on something you may see in the early 2000's. I mostly just built it to what I thought looked nice.
I was building a pair of runners from several incomplete cars and my used parts stash and noticed some variations among the parts.
There are 3 types of rear bulkhead. The upper left one has been hacked up by the previous owner, but you can see on...
Last post
Early shocks also had a longer 'tab' on top, with the hole closer to the upper portion (not centered top to bottom). I don't have a picture as a comparison.
Hello gentlemen!
Here's my latest FB marketplace score! From the looks of it, there are a number of upgrades on this beast but I've never ran a jrxt before so I can't say for certain. That being said, I think I'm going to just clean this one up as...
Last post
Nice truck! That should clean up good. The upgrades that I see are.. Tecnacraft turnbuckles, ball bearing steering arms, Pure-Tech battery strap, Lightspeed Litesink and A&L Powerclutch. Also has AE antenna mount and AE battery box used as a esc...
Hey all, I picked up a JRX2 a couple weeks back originally with the intention of just restoring it but now I’ve decided to get her running in the local 17.5 class. First, a little backstory about myself: I started racing off road Production class...
Last post
More to come but this year's Kinwald Classic 5-link build is moving right along :mrgreen:
Not going to be much more newbie than this series of questions.
This vehicle is a JRX2 or a JRXT? I know the wheels should be a dead giveaway, but there are a couple of things (body mounts) going on with this rig that say it ain't a T.
LOSI JRX...
Last post
Thank all!
Anyone have a Pro SE chassis sitting around that could take some dimensions for me? I am thinking about narrowing this plate down to SE specs, like the Cox Bros. and later Lavigna did, so that I can run an A&L body that I have for a SE....
Interested in buying some RPM wide rear links for the JrxT I’m working on, but I’ve got the retro XX trans which uses dog bones vs. the telescoping stock driveshafts. I’m worried with the additional width they might put the drive pins to...
Last post
If anyone has some they’d be willing to part with let me know! Thx
I am building this JRXT to go with an amazing painted A&L Roadkill body I have. I plan to build it in sort of a vintage oval racer manner, with short shocks and Factory Works towers. I think the 5 link rear suspension will go great with the body.
I...
Last post
That is one cool build! The stance, colors, and carbon just look right, truly is functional art.
Hello all, I just joined up on rc10talk because I wanted to pop in and say thanks to clm and others working on pushing the 3d printed mods forward for this platform. Like many others, my childhood Losi became a mashup of parts over the years from...
Not sure where to put this so since the wheels are going on my JrXT I’ll ask here…. Got a set of front HPI super star wheels with the purchase of the JRXT, but the 3/16x3/8 bearings from the stock front wheels are too small for the HPI wheels….The...
Last post
Could someone please provide information on the front wheel bearing size for the HPI MT Super Star? Thanks!
It depeds on which adapter you have to use. Look at the above pictures.
So I’m putting together a runner JRXT and the original shocks that came with it had the normal broken shock collars and one of the shock cartridges is leaking a bit….
Wanted to know if I could use these shock bodys with shock cartridge A5015 and...
Last post
The JRXT uses .9 shocks front and rear (assuming 5-link suspension and shock tower). The original shock seal cartridges are a different length inside and out though, so when you use the newer style cartridge, you need to use the included spacers to...
Hey all, thanks for the help with all my noob questions so far here!! I just purchased a spare parts lot and I’m hoping y’all can help me identify some of these parts.
Came with this motor plate says JRx2 and it’s like a flat blue anodizing…. This...
Last post
Appreciate the reply!
So x2 and xT have same rear bulkhead but the x2 has wing tubes? Thats the only difference?
Yes, they're both the same part. The wing tubes just press in.
Picked these up but no nothing about them. What years were these made, how rare are they, were they a decent shock?
DSCF4142.JPG DSCF4143.JPG DSCF4144.JPG
Last post
Since nobody mentioned a date, these are in a Trinity 1992 catalog. I'd need to dig more to see if they came out earlier. I do know that Trinity had blue ano Clod shocks back in 1990, but they have a different design.
Picked up a very rough JRXT I’m working on restoring for a runner and it has a retrofit trans which is cool, but what does everyone do for the rear body mount?
The parts gathering for this build has achieved a critical mass and is ready for some assembly.
Last post
Replaced the used front axles, spindles, uprights and king pins with new parts. Also upgraded all the ball studs with Losi A-9945 & A-9947 titanium ones.
The last byggy I raced was a XX CR back in -97. I still have it, but I can´t get myself to drive it.
So when a XX showed up on a local auction site I waited patiently until the last 15 seonds and placed my bid. Won it at $90!
The Tekin charger was...
I got a tip regarding a Junior T for a reasonable price and from a neighbour country here in Europe.
I bought it thinking it would be a nice pile of parts.
It turns out the truck has never been run. Not a scratch anywhere.
I guess it is a late...
Last post
I contacted TBG regarding the Junior T body. It turns out they had stopped making it due to supply shortage for the specific Lexan needed.
However they managed to make me a body using a different material. Big thanks to Trish and Jon! 8)
MCI...
I'm looking for a Tamiya paint code for the blue on the box art for the Losi Jr-2, Junior 2. Looks like a metallic blue , maybe?
Any help will be appreciated.
Thanks
Last post
This wing is painted in Duratrax metallic blue, backed in metallic silver.
Well,it's all done,apart from a few touch ups and some decals I need to slap on.
Not bad for a test body .
It's a Team Bluegroove body,I came across and bought a genuine NIP Losi body while this body was all masked up,so I thought I might as well...
Here's my LX-T that I raced on carpet ovals as a kid. It's close to how it was back then, except for the .36 shocks and yellow motor plate.
I ran A&L Roadkill & BTS Liberator, Dahm's Ruff- E-Nuff SE and Andy's Lo Profile bodies. I had Trinity...
Last post
Well... it's a cream dream. Probably my favorite yet. 8) Seriously.
I thought it would be great to have a STICKY thread here where everyone posts their favorite pictures of all their Losi vehicles. This can help make up for all the lost pictures from Photo bucket.
Last post
Hello,
Yes, I've got a JRX2, but it still requires a lot of work before to be showable :lol: As soon as rebuilt, I will post a few pictures.
I found these aluminum uprights for a XXX_SCT and was wondering how their geometry compared to the XXX. AS in, if the caster and spacing were the same. Any ideas?
I gather the SCT kingpin is longer?
I just picked up a XXX BK1 for no good reason...
Last post
Never mind: the pins are all 1/8 , vs the 3/32 on the buggy.
Any suggestions on replacement Jrx2 rear tires? Seems like there have been a few 2.0” tires available in the past, but nothing currently. I’d prefer some 4 rows like the originals but would settle for almost anything that looks like it came from...
Last post
Here are some more Tamiya 2 tires.. 50344 spike, 53059 stud spike & 50269 oval block/spike
Never seen this before and have had a lots of them. Triangle center? I could see how it would create less friction yet still support at this common area for melting?
Last post
I'd like to start an official conspiracy theory on this. Needs to be a vintage one rooted in 1990 give or take.
After building my Jrx2 series buggies and setting aside parts for another build or two, I still have a decent sized pile of used Losi parts. So I have decided to take the worst parts that are still functional…you know..the scratched, faded, rusty,...
Last post
I have been driving this truck a lot and decided to make it not quite so ugly with a body upgrade.
Really nothing special here, but all these years later my wife came across these old pictures of mine. This car was my younger brothers that I built for him back then. Thinking back to when we built it I could have sworn it came with red logo wheels...
Last post
At the time it would be weird maybe, but with benefit of hindsight now would be cool to have recevied a we're using up spare parts kit. AE did it too with the RC10's. If you had one today you could get everyone on FB arguing about it and then put it...
I know this model is right on the edge of vintage, but it's Kinwald so it automatically gets a pass. :lol: I have been saving up cool and rare XXX parts for several years because I knew I would eventually build some sort of XXX car. I finally...
Last post
Incredible build! I mistakenly commented on your gallery post but I'm in awe of your collection! I remember always drooling over Brian's cars back in the day. You've done an amazing job with all of them!
I have been a Team Associated guy for well over 30 years. If you were to hand me a pile of parts from any of the old Associated cars, buggies, or trucks, then I could correctly identify and assemble all of them...
Last post
McAllister #135 Ford Truck Body 1/10
Wow that is cool! Thanks for the info!
The body I posted above is on the way to another member already :mrgreen:
I have an xxx4 front diff that is completely missing out of car and its been slow to find one. From what I read the xxx-s shares very little with the xxx4 but are the diffs the same? Is there any other diffs out there that could be substituted off...
Last post
Welp, it seems like I no longer have the xxx-s as I cannot find it. I still have the jrx-s but yeah...day and night differences there. Once all the dust cleared I had bought the one from valkarie one and an hour later received a PM from Spain that...
Looking at my Losi Mini-T 1.0 (old rear motor version) I found that if I would stretch this thin a little bit, it would be quit exactly a 3/4-Scale-1/10-Buggy .
With 180 mm instead of 240 mm, according to that the...
I am a fan of the Losi LRM transmission and the upgrades available for it..so this is a cool one. This MIP L-260 kit includes a different top gear and diff gear to change the original LRM ratio from 2.18 to 2.6
Last post
Nice! I put one in my LXT back when I still raced it. And I think I have a backup kit I got years later.
When upgrading the original jrx2 to a pro using the proformance kit what shocks are used in the front? The original short body (.6)? I know the production jrx pro uses a long shock and shaft (.9). There is a post on here with the entire upgrade...
Last post
That was perfect! The box clarifies that there are long shocks used in the proformance kit in the front. Those gold shocks are super nice I have a set on a stellar jrx pro se
So I picked up this used JRX2 a few month ago. It was in decent shape and has a a few pretty nice period hop ups. The 3 piece front wheels are kinda cool. Bottom isn't too gouged up. (ugh stop rotating my pics....)
IMG_20221222_113533309.jpg...
Last post
That has a nice assortment of upgrades…looks good! Thorp top gear too. I might have a set of silver .9 shocks for you…I’ll check the stash later.
Since my other car projects are about 90% done, it makes sense that I forget about them and dive into another.
Here's my JRX Pro-SE. My parents bought it for me very late in my RC car racing phase so I raced it very little and did very poorly...
Last post
Just an update about running the Pro SE. It's been a bit since I've tinkered with it, but I've had it ready to run since the fall. Managed to get it out on that tennis court dog park this past weekend and really get a feel for the handling with the...
Does anyone know if the XX transmission braces with the ears or fingers on them give any extra strength or rigidity to the chassis or transmission compared to the simple little rectangular braces? This will be for a runner build with a modern motor....
Last post
I have only ever broken the ears off the transmission case just behind the holes that screw to the bulkhead. I don't believe either brace really solves that problem (unless others are suffering different failures to me).
Friday I finally got my new project in. The previous owner must have really liked Miller.
Despite the mismatched screws and some maintenance neglect and some incorrect parts like shocks and wheel it was in pretty good shape. Also pretty...
Last post
Going through some stuff i realized I had an extra set of truck threaded shock bodies. The shocks on this car weren't a matching set and on top of that the silver front bodies don't seem to seal up to the newer style of cartridges very well. I...
This is planned to be a high end XX4 with modern electronics, running a 13.5 brushless motor.
This project has been in the pipeline since before I finished my early version XX4 shelfer, several years ago. I have been gathering parts for the past...
Last post
A few final pieces, such as steering link and Dragon aluminum wing mounts.
Users browsing this forum: CommonCrawl [Bot] and 0 guests
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum