RC10Talk - The Net's Largest Vintage R/C Community

You're right, the arms are shiny white. They are plastic (nylon?) injected. It's not 3d printing or machined in the mass.

I also have parts that I bought 20 years ago.
6605 transmission housing: A viper body: and its rear wing:

Still at JC Racing Concept I bought suspension arms: https://www.jcracingproducts.co.uk/vintage-car-spares/associated-rc10-arm-set-4
I ordered "soft" and white.

I also bought wheels from JC Racing Products: https://www.jcracingproducts.co.uk/wheels/ae---rc10-5-spoke

I also made a aluminium transmission brace. I only had 3mm aluminium, so I made holes to lighten it. The two holes are there to put a drop of oil on the sprockets from time to time.
We can also see the suspension mounts with 3 degree of toe-in

Thank you Frankentruck for the advice.
I did as you said and the steering works fine.

An aluminium rear bulkhead (Dhawk Racing too):

Hello.
I bought a few parts to replace the damaged ones.
6274 plastic ball rod ends: impossible to find them in white, black will do it.

An alumium save servo with ball bearing, from Dhawk Racing:

Hello. I would like to run my RC10 (6 gears) with a brushless 17,5t. In others posts I read that the black gears (intermediate) are fragile with brushless. What can they be replaced by? The black gear seems to be 32DP, a motor gear 32DP run well on it... Is it able to adapt a 32 DP 22 tooth? Thank y...

Hello. Thank you for the answers. Do you think that turbuckles 4-40 can be screwed (in force) in M3 plastic ball rod ends. I saw plastic ball rod ends with ball ends in a French online store. For the servo saver I think I will order a Dhawk one. I will avoid ordering from the United States, the taxe...

Hello. Here are the broken parts. The plastic ball rod ends, 6 of 14 are broken: IMG_20220313_185922487.jpg The two parts of the servo saver are broken: IMG_20220313_190107521.jpg IMG_20220313_190148187.jpg Two of the four plastic rod end of the shocks are broken: IMG_20220313_190403935.jpg Associat...

Here are the pages of the magazine which explains the assembly of the ESC : it is in french...) Vario électronique_Page_1.jpg Vario électronique_Page_2.jpg Vario électronique_Page_3.jpg Vario électronique_Page_4.jpg Vario électronique_Page_5.jpg Vario électronique_Page_6.jpg Vario électronique_Page_...

With age the plastic of the motor pinion has broken: P1000273.JPG The loader i built: P1000269.JPG The charge was cut off when the battery temperature exceeded a certain threshold. There was a sensor like this on each pack: P1000274.JPG And here are some pictures of the buggy today. plastics parts h...

Hello. As said in my presentation I put some photos of my RC10 CE which spent 20 years in its box in the garage. It is a model with the 6-gear gearbox, bearings everywhere, a ROBBE ECO 2-WAY 27Mhz AM radio, standard 27-turn YOKOMO motor, and a homemade electronic speed variator based on a plan from ...

Hello RC10 fans. My name is Vincent Leclerc, I live in France near Perpignan, almost at the Spanish border. I started the RC car in 1980, with a Stock car Mardave. Stock car Mardave.jpg Then a copy of SG Futura made at the technical school. SG.jpg Then a Bullit from MRC. Bullit.jpg And to finish wit...