RC10Talk - The Net's Largest Vintage R/C Community

I used an Ultrahive decal to create a replica Jr's Choice motor from a 16x2 motor of unknown origin. It looks decent next to the real deal in my Jrx Pro. 20250420_150400.jpg Trimmed and painted a rough motor plate. Added a hydradrive. Color combo is a bit Ronald McDonald. 20250422_155100.jpg 2025042...

FanRC Racers kit Worlds and extra diff hardwares. Also some bonus bubble gum and tooties for the kid. Moocho quick shipping from GoFast Hobbies too.

That looks really good! Thanks! 8) Now with a XX CR body I painted back in the day (a bit poorly - I must have touched up some spots after removing the window masks and dusted the windows a bit). The XX body sides are a bit short for the Pro SE chassis, so I may decide to swap to an SE body. Anyway...

Screenshot_20250427_194133_Gallery.jpg Shakedown run today. Truck is really really good. Didn't have to do anything from my baseline setup be turning high 12s laps (the 13.5 modern trucks are hitting high 11's) zero issues, zero broken parts. The track was very dry today, even after watering it the...

Lavigna wrote: ↑Tue Apr 29, 2025 9:59 pm Can anyone let me know what you think the current value range is for a kit like this? All the AE rereleases are mudding the waters.

C'mon man!

Got a couple white case Ace servos. They aren't particularly strong or fast but damn that looks sweet.

Finally got wheels and tires for the Ten4.1.
Front wheels are Schumacher, rear wheels are Losi, tires front and rear are Ballistic minipin.

I can understand the no tires thing. This is such a phenomenal piece. However, deep down, you know you gotta put tires on it. Or, at least, two "O"-rings per rim, as I've seen lately.

Boggling of the mind occurring (due to the incredibleness of the build)

Amazing! Everything you build

WOW, just WOW

Now may I suggest the Losi Jrx2 Pro SE body for this build? I believe the ultramolded was actually intended for that body.

The era correct hpi wheels are all 2.0. They later made some 2.2 I believe for the Kyosho super nitro cars which would likely have the correct offset but are a 12mm hex and would not be era correct. Check part number 3032.

Chewbacca wrote: ↑Tue May 06, 2025 9:48 am WOW, just WOW

Now may I suggest the Losi Jrx2 Pro SE body for this build? I believe the ultramolded was actually intended for that body.

That's correct

The era correct hpi wheels are all 2.0. They later made some 2.2 I believe for the Kyosho super nitro cars which would likely have the correct offset but are a 12mm hex and would not be era correct. Check part number 3032. I have a super nitro, I can pull a wheel later and get you measurements if y...

Wow, absolutely stunning

Hinge pins, lots of hinge pins, and a few shock mounts.