RC10Talk - The Net's Largest Vintage R/C Community

A Losi XX KE

A Losi XX CR with a first XX edition body + wheels

Hello Adam! Thank you very much! But none of my cars (even if they are new or in perfect condition) can be compared with your "over the top" builds. I will try to clean some of them and make some clean pictures of the cars that were not posted here. For the paint scheme, as shown hereunder...

Second step : building of the rear (without transmission, I need to finish the building of my diff (Thanks Adam :wink: ) , it should be ready in the next 15 minutes! For the rear motor plate, I will use a standard one (black), as I have no more machined parts, but as the car will be in "black v...

Rear A-arms are here; next step will be the building of the chassis, transmission and rear shocks.

Transmission and rear shocks are done, and I started to work on the chassis...

Hello! So, the first step (to assemble something) is finished. I built that car with a Sabulatech front bulkhead, but as I should receive an aluminium front bulkhead + a gearbox brace from Rusti design in the next days, I will update this post. I will change also the screws to switch to aluminium bl...

Hi!

I added blue screws, the gearbox brace from Rusti Design and also the aluminium bulkhead.


So I will try to find a body, and then it should be OK

Have a nice week-end,

Essejay

As usual, super nice car! Thanks for sharing with us.

Thank you very much Adam :wink: As I had some XXXT's white wheels, I used them on the car (+ Losi tires). Now I will have to find a body for this car (probably a repro, it will allow me to use my paint scheme) Have a nice week! https://nsm09.casimages.com/img/2021/05/31//21053107381425345817444820.j...

Hi! Regarding the body, as I did not found a decent XXT-CR body, I purchased a TBG body. Regarding the look, the rear is OK but the front is too "round" (I prefer the edgy shape of the original body...). Anyway, If I find one day an original one, I will change the body; for now it should b...

Hi, First of all, happy new year! For 2022 I decided to make some vintage races in France (we have some vintage national races organized). My wish was to build a runner with parts I already have. The missing item was a front bumper, I purchased this item to Rusti Design. I also added (for the look) ...

Hello!
Yes, Team Blue Groove makes Junior T bodies, ans MCI makes Junior T decals.
There is an example of that combo at the bottom of page 2 of "post pictures of your Losi véhicules" from Lavigna.
Have a nice weekend

Hello Adam,
As usual, an incredible car .
Happy to see that you found a Proline body ( I didn't found anything on my side).
Best Regards,
Essejay

Hi!
A small picture (awful quality, as usual... ) of my built Losi cars.

Have a nice week-end!

Essejay