RC10Talk - The Net's Largest Vintage R/C Community

If you really believe in what you have built then vote for it , if not vote for someone else , I've done both , I don't mind being beaten by a better car and often agree with the result ! That's one thing I've been curious about how entrants vote, personally I've never voted for my own car, it seem...

Tamiya TT-01 Lancia HF integrale evo replica of my real car. Purchased in 2005 and it gets run on occasion. Mods include: Full bearing kit, Aluminium Prop, GPM Bell crank, GPM motor mount, 3Racing shocks, aluminium hex drives, Killerbody aluminium wheels, HPI tyres, Hobbywing EZ Run Brushless combo ...

I got a set of their new RC10 B2 2.2 wheels with narrow fronts recently. They look really good but the front bearings are really sloppy in the wheel.

I got a set of their new RC10 B2 2.2 wheels with narrow fronts recently. They look really good but the front bearings are really sloppy in the wheel. :( Could the poor fitment in the wheels be a case of mixing millimeters and inches on the bearings? Pretty sure these wheels uses 3/16” X 3/8” bearin...

A cheap ebay buy of a tired RC12L rolling chassis. Stripped, cleaned & fitted with Futaba S135 servo, Tekin Tempfet esc, Tekin 27MHZ Mini receiver, Sanyo 1700 SC saddlepack, Yokomo Esprit 1/12 RPM mod motor, a Bolink intrepid GTP body & some new foams trued on original wheels. https://live.s...

Nice esc & not easy to come by. Released 1987, 150A/450A & rated at an 18T limit. 3 wire fwd & Brake. I did have a copy of an MC110 manual, which is similar, on my laptop but lost it due to a knackered hard drive although they're straightforward to set up. If you decide to get shot of it...

So looking at your ads, it looks like mine is the Vari-pulse mkII. https://live.staticflickr.com/65535/51176620284_42761829bd_k.jpg This is my Schumacher PC1 as mentioned in that article (which I had)... https://live.staticflickr.com/65535/49644982077_522f36853e_k.jpg And this is a Schumacher PC3, n...

On the PC1 the red light comes on when you connect the pack and press the button then the green light comes on when it peaks. I assume the PC3 is the same but haven't tried it.

I've managed to grab a couple myself. I've got a 27T, a 24T & a Modified 19T Quad. The Modified is new, never run or soldered. I had a std 27T & a Mister T BITD when I had the CAT https://live.staticflickr.com/65535/51208098484_3e96918862_k.jpg https://live.staticflickr.com/65535/51207537653...

Awesome that you have everything intact, and yes, that's very young to have such a car.

Welcome to the forum, nice first post.

Here's a little display I've mocked up to go in my glass cabinets (once the room is decorated )

Fairly cheap perspex display shelving & perspex stands.

caesar wrote: ↑Tue Jun 01, 2021 8:17 pm I use a similar setup as winner_evo.
Use zippo lighter stands for the motors, pretty sure I paid around $25 AUD for 45 of them.

Yeah, that's exactly what mine are, I got 30 for £13.

Here's my Andy's Protech body that I posted earlier but now with MCI stickers & a set of JC Racing wheels.

Schumacher CAT tyres are 2.0", I have them on a couple of RC10's.

These are Schumacher Mini Spike on the rear...

Here's a Laser Comfet I recently picked up. It has reverse with the relays under the board like other Laser's.