RC10Talk - The Net's Largest Vintage R/C Community

All done.

Didn't get the JG rear shock tower, got ripped off on Ebay.

Almost there….

I think I have the original car

I just finished this JRX-Pro chassis. All graphite cutout chassis and a lot of new parts.. This is my favorite buggy of all time and really tried to make it perfect..only thing that isn’t “correct” is the shock collars but the wide black ones really look nice. Do I have to put a body on it? https://...

Jammin J-550 Pro-SE Steering Enhancement Kit I have two of these kits…so I decided to open one up, install it on my Pro-SE and see what it’s all about. https://i.postimg.cc/CLRMcynn/6-F1-C2564-28-E7-4-D73-B3-EE-DBE9-D1-CA8-AB6.jpg The shock tower is the same shape as the original, slightly thicker a...

And it’s done.. The JRXTrugly! The ride height is set a little high for more ground clearance and the body set low…looks better than I thought it would. https://i.postimg.cc/QtNhxnDk/2-FF8-F4-A5-4-B75-42-DC-8-C95-B05207-D60-C1-E.jpg https://i.postimg.cc/s243zCkg/4-BDDF528-B633-4-B09-A336-0-E0-E76939...

Since I have been building my XX4 modern racer, I decided to try adding some period electronics to this one. I'm not going to solder anything in yet, but I think I like how it looks.

Welp, qualified first in the Vintage B main and had the lead til the very last lap when I buffed it lol With the exception of a turnbuckle the old girl didn't let me down all weekend. So fun actually racing a JRX2 after after 30+ years. Good times!

I'm in too 😁 Here is my proto PHM 4wd, build few month ago. I used a yokomo yr4 m2 transmission, mounted as mid motor, and I build the other parts as the chassis, front arms and monoshock setup, rear suspension with trailing arms. I finally use yokomo drive shaft, wheels adapter, wheels and body (ho...

(Proto Cougar Detroit Report part 2) Well… here i am again, this time i hope i can write some more detailed information about some parts, and the actual start of the build. As said before, i have been collecting the parts for about 2 years, and two months ago I started this build (see report 1). Now...

Hi all, recently I was fortunate to acquire a ZX-S Evo that started build a little but stopped. Except for 2 bags all others had been opened. It made good sense then to build the car and check what could be missing. Plus I have always wanted to build this rare car. The car had the front end assemble...

(Proto Cougar Detroit Report part 3) Hi RC friends… it’s me again, with another bookwork… 🫣😉 In this report, i will go further in some details, but also the final steps of the electronics. As you have seen on the last photos the shocks where mounted on the rear and front. Kevin pointed out he was us...

I got a nice set of early JRX2 rear hubs without the corner reinforcement..cleaned them up and installed. Makes my early JRX2 build just that much more betterer!

I started installing vintage electronics in my JRX-Pro and had to pause because I’m not sure that I like it.. The bare chassis looks so awesome by itself! Anyone else have this dilemma? https://i.postimg.cc/rwrtdSFk/FFEB1-FCB-DD9-F-4770-A890-2-C4501202653.jpg https://i.postimg.cc/G2F97QVM/0-CBDBA31-...

Threw the body and wheels on the Mid 22 for a quick look.