RC10Talk - The Net's Largest Vintage R/C Community

Started in rc at the age of 11 been in and out over the last 30 yrs some racing some bashing and now mostly restoring and collecting. Still got my attention after all these years. Vintage pan cars circuit & oval are my current focus has such a great history from Joel johnson to the insane speed ...

Hello to all, it's been awhile. Before I get into anything, I will be doing my best to put back together the "history of the rc10t". I doubt I still can remember all the fine details though... While the damage does appear to be on my end, it was not me who did this, and may have a theory a...

The time has come, let's get the ball rolling. First off, I'd like to give a big thank you to everyone that took part in this project for their time/parts. Hopefully this will give us a nice cushion in the server funding department. 8) So as you've seen on here and FB over the past few months, a gro...

Hi all, glad to be here. A friend at work recently gave me a few RC cars, one being an RC10 with graphite chassis. It is in pretty rough shape, but i'm gonna try to restore it as the RC10 was my first RC car, and has always held a special place in my heart. I started messing around with it about a w...

I recently got my hands on some TQ70 front tires, and am having a difficult time finding wheels for these as they are 2.0". The two sets of wheels i have for my RC10's are 2.1". I would really like to get some 3 piece wheels for these. Does these exist? I've come across a few 2.0" whe...

Available in limited quantities

DS Aluminum Screw Kit that will complete a full RC10DS Original Kit with aftermarket Electronic Speed Control, also includes Stealth transmission case screws.

Mechanical speed control not applicable

$40.00 plus shipping

[email protected]

You won't use the round plastic spring cup to the left of the spring in your pic. You do need the smaller one (LOSA 3124) that goes on the end of the small spring (only use 1 of course) with the nut topping it off. Not sure if a plain washer would suffice since there is nothing to keep the spring ce...

I've got a picture I've pilfered of a box end online and forwarded it on for the 10T thread, but it was at the time when the thread fell apart.

I'll have to try and dig it up unless someone else has one

Here's the truck.....

Sorry for the crappy pic as I pinched it from the interwebs.

Jeff Malar - Custom A&L Chassis and rear suspension Jason Csontos - Front end and steering Joe Scaborozi - Custom rear chassis brace, nose tubes and front body mount Roger Pangilinan - Custom shocks Mike Anderson - Aluminum spring collars James Boyd - MIP trans and cvd's Mark LoBraico - Jconcep...

Bringing this back up. I was looking through an old RCCA buyers guide and seen this. Screenshot_20211010-143306_Gallery.jpg Screenshot_20211010-143249_Gallery.jpg Just a little something to differentiate between the "#551 Mr. Outlaw" and the "#553 Super Outlaw". Or just more to a...

I wanted to build something a little different after picking up a well-used and poorly-dyed Lightz fiberglass oval conversion. This is the result after filling extra holes and damage, sanding and painting the chassis. - JCAR DDS tranny - Raborn sliders & rear arms - Cheetah QC/DC battery system ...

MarkyDents wrote: ↑Sun Oct 24, 2021 10:44 am Bringing this back up, gotta ask…….
What was the big change you planned on doing ?

I have some vintage black MIP shocks for the truck. I am just waiting to get them refinished. Once they go on, the stealth look should be complete. Thanks

As of now, yes. I don't have the worlds rear parts for this one, nor white rpm rear ones either. it's something I'd like to change, but it's a cost/availability/worth calculation. Plus, I'm still on the fence for modifying the chassis(further). it has unfortunate servo holes and a notch already, so ...