RC10Talk - The Net's Largest Vintage R/C Community

pma1123 wrote: ↑Sun Feb 09, 2025 2:25 pm I’m happy with the bodywork.

Judging from how well it sticks to the wood floor It should handle well

Really wish I knew wtf causes the forum to flip pictures over.

Recently put up a small shelf in the house for my wife. She said we could share it and all she wanted to put on it was a nice wooden mother mary statue. I asked, "So I could put anything else up on the shelf?" and she replied "yup". She basically gave me free range so I took it a...

I needed a 3mm tap and the hardware store didn't have one that small. So I went to my LHS. I ended up teaching the friendly but clueless young 'un what a threading tap was and showing him where they have them. But he was thankful for both lessons so it was worth overpaying for it there. :mrgreen: ....

Got stickers?

There was once a time when members had the ability to create their own polls, but for whatever reason it was eventually taken away. I believe I've come up with a solution that should work which is a dedicated forum just for polling.


https://www.rc10talk.com/viewforum.php?f=146

You guys made me realize that your idea of a heap and mine may differ...

Kyosho Pro XRT with some Nitro Pro arms. CAM motor, Tekin Sport ESC and a FlySky AFHDS receiver cobbled to a Kyosho 432 PT. The truck is setup to run carpet.

This thing identifies as a RC10T. It has one of the $20 Injora transmissions on a heavily "modified" A stamp chassis. The rear is filled out with ECX shafts, heavily clearanced 10T arms, and Traxxas carriers. The front uses a 10T nose and bulkhead, Traxxas arms. The front hex setup is piec...

Did the motor have a letter scribed on the end? Sometimes the first letter on the model name is on the shaft end of the can. It has the number 323 engraved in the shaft end. I couldn't find a reference to the number, so I pulled it apart and can see it is a double wind. Of course, I can't count the...

This is "Hotmess". My junker hornet. Screenshot_20250306-130658_Gallery.jpg The electronics are spares that I had from rebuilding other cars. The esc from my old stampede is on deaths door and has no reverse. It has an ampro locking battery door and ampro shock mount. The shock mount crack...

This is a custom chain drive Tamiya Frog. Be sure to zoom in on the pics to see all the details. It has an ultra tall gear ratio with this setup. The B&R that was originally chosen for the build just didn't have enough torque, so in went a Lemans 550 360ST unit. It worked perfect. It is not just...

Run down of build 40th kit OG CE Stealth Transmission OG CE long arms and shocks rebuilt Rere team universals joints Factory Works carbon towers, battery holder and trans brace Fan Rc titanium turn buckles Team Losi Ball cups Fan Rc Worlds steering bell cranks Original AE front and rear sway bars up...

Here is my "ugly runner"....It started as an Associated T3 stadium truck. The chassis, rear shock tower, bumper and braces are all G-10 fiberglass, hand-cut on a scroll saw...Dimensions have been stretched to short course specs. The bulkhead is actually a servo mount from Exotek, and steer...

Behold a build most Grotesque. https://www.rc10talk.com/viewtopic.php?p=581151#p581151 Screenshot 2025-03-09 195431.jpg IMG_20250308_002002083_HDR.jpg IMG_20250308_002113666_HDR.jpg The more you look at it the worst it gets. most of the parts are bent and tweaked. Rusty and/or stripped hardware. Hin...

Ok, so this is the car that has the misfortune to be owned, and even worse driven by me ;-) My “transponder-carrier” B6.X started as a B6.1, but received a few updates like: - B6.2 rear suspension, mainly due to parts availability - B7 KPI mod up front, not 100% on it yet. But for now it gets to sta...

My builds are quite involving, and they are taking time : on this one it reached another level. Not a single original part was used. Lot of 3D prints and home made parts, some replacemnt parts widely available, and we have a *not* Zerda, and it took about 2 years and a half to get there between the ...