RC10Talk - The Net's Largest Vintage R/C Community

No clue if that was the right armature but it did fit. So I'm calling it good enough, or at least better than being disassembled in a wet box.

Factory Works Ten4.1

https://www.rc10talk.com/viewtopic.php?t=50534

Rc10MT conversion Back in the early 90's I had an uncle that was getting out of the rc game and gave my father an rc10 with a handful of spare parts. It sat for almost a decade when I decided to get it running again, threw in a novak duster and silver can, and then went on and converted it into a mo...

Figured I should make one thread for all my custom paint stuff. Astute: Screenshot_20250425-213248_Gallery.jpg Astute Undertray: Screenshot_20250427-211213_Gallery.jpg RC10 Boki Mirage #1: "Cashflow" Screenshot_20250425-182201_Gallery.jpg RC10 Boki Mirage #2: "Kinda Kinwald" Scre...

Found another chance to run outdoor, on-road asphalt (can-am) at another great vintage meet-up/weekend....much tighter course, was designed for 12thscale. Took a while to get used to the track and find the right setup....but in the end the old Predator Lynx hooked up pretty good. I'll post a run vid...

Lastly, I went with two set of wheels and tires- (barcodes on white JConcepts, pins on Jammin Jay fronts and stock dyed rears). I also wanted a box art body, or close to it. I'm pretty pleased with it. It will do a backflip if you hammer the throttle from a stop, or pull the front wheels up for 20-3...

Frankentruck wrote: ↑Mon Jun 09, 2025 7:54 pm

Dustydrone wrote: ↑Mon Jun 09, 2025 7:49 pm Well... I finally got around to putting these classics out on display.
1000016816.png

Oooo, very nice display! But now I have a question. Is that PCM radio used with one of these three?

The PCM actually lives with a vintage RC10 CE. It's just a cool display piece.

Not as POS-ish as some other members, but here's some more of my junk. $40 Ebay Grasshopper (GH 2 body). I bought some Blitzer Beetle wheels on clearance, a pinion, and a battery door. Everything else came from my junk stash. I have less than $60 in it. It has a Redcat 550 motor, Axial esc (with dra...

Kinda sure this is one I don't have, until now.

The cups and collars are AE but the shocks are not. They have no hex under the cap. They're possibly Parma (I think they may have sold a blue shock like those but not 100%), or re-ano'd Duratrax or Kyosho golds. Could also be off some Bluebird model I don't know about.

I was really curious to see what GrePo was going to enter. I was almost sure it was going to be the world's roughest, most abused Yokomo 🤣 The world's roughest Yokomo failed without a chance against the Hopper in an internal preliminary decision. The only thing I can do with it now is to dress it u...

A little goofing off I did awhile back. More designed for a 4wd onroad truck, but travel could always be added. It was just a proof of concept thing.

Got the front brace made. 20161228_121223~2~2.jpg I know this is an old thread, but did you have this made or make it yourself? any tips on making one for myself? Well I got the fiberglass from an old TRX-3 top plate, then measured the hole spacing and determined the correct dia. drill bit. I think...

Despite being a lot of RC10 versions, there's nice variety this month! I think the rere parts availability has really helped with inspiring new builds. Nothing too special. Fairly nice RC10 runner with a Kinwald inspired body. If there is a mod for the 6-gear that makes it smoother, this has it. Te...