RC10Talk - The Net's Largest Vintage R/C Community

The Plate that is attached with a screw from the outside of to the inside gear box is used to keep the diff centered, the notch in the plate allows very little movement left and right while spinning to prevent the adjustable diff nuts from rubbing on the inside wall of the gear box. There is only 0....

Excellent cleanup and re-build.
And yes it looks like it was never run

That really is a lovely example , you got all the hard to find parts in mint condition on an early car , tires , wheels , top deck/chain guide ,even the shocks are not overly marked up from the adjusters .
Quite jealous really .

There is a BEC in the form of dropping diodes , under the switch is a dropping diode . I've never run mine with the mechanical Speedo so don't know the details exact function of it .

One question regarding the mechanical controller. Can someone explain the function? Ist seems to me that forward can be regulated, but reverse is seems only full and between 0 and full the motor gets short cut, ist that kind of break? Especially the large switch and why the drive battery is directl...

It's virtually impossible to put a price on but between £375 and £575 depending on the day could go higher, if you put £600 buy it now on eBay it might go or sit there forever .

RC150 or 200 I believe. The chicken hopper tank was stock, that one has a different cap than I have seen tho. Usually a spring loaded flip up mechanism.

Lancia Stratos body