RC10Talk - The Net's Largest Vintage R/C Community

The 917K required some colors... I thought about red/white, green purple and blue orange, and that's the last one I chose...

Normally, the 917K should be ready for Belley

Made gigantic setup changes to my sons B6.4D to run a 21.5 class this coming weekend, massively increased the chassis flex via plastic side rails, removed the waterfall brace, plastic front and rear arms. Then softened up.the front and rear with 2.0mm 1.8 x 2 pistons, 27.5 wt oil, and 3.6# springs, ...

Worked on rebuilding another old Tamiya tourer, this time a TL01... 20250601_150156.jpg 20250601_150151.jpg Added it to the group of Tamiya touring cars recently finished (or very close to finished)..... family photo: Cars.jpg Left to right: TT01, TB01, TB01, TL01, TL01. The silver car belongs to my...

No Fox Given





Build thread here:
https://www.rc10talk.com/viewtopic.php?t=50554

Uh oh, what I miss? :lol: :wink: I know the MIP CVD's is one, but it at least has the CVA's. I also didn't discuss trimming the wheels. I realized I missed the CVD's after I was after I had completed editing the video. I didn't want to dig the stuff back out and film it, then redo the video :lol: . ...

Here's the build thread of my car. There's a pic of the bulkhead just sitting on the bench after the mods. Also notice my screw up on the antenna mount. I angle cut the wrong side by accident.

https://www.rc10talk.com/viewtopic.php?t=41196

My rear one is actually too tall. It doesn't let the body sit as low as it should. I'd have to dig the car back out, but they're the same diameter as a stock body mount. 8-32 screw. The rear one has the same pin height as a stock mount, but the pedestal holds the body up. May need to be 3/16" t...

IMG_0701.jpeg Rc10 DS Dhawk Racing Aluminum front caster blocks, rear hubs, rear control arm mounts, bulk head, battery tray , upper and lower spring perches, and bell cranks, Nostalgic RC carbon fiber front and rear lowered shock towers, rear trans brace, carbon fiber slipper, front bumper, silver...

I dony know what's next, but it should be this ...

Not that I need any more Jrx2 wheels..but I got 2 more sets.. finally a matching set of Pro-line #2547 & #2548 chrome wheels.. and getting closer to a complete set of glue on wheels.

I was wondering why all these helicopters are buzzing my home. I've been framed!!!

With all of my rc10 runners, new and old, using modern hex and offset wheels in the rear for now, I was excited to finally see the pioneer wheels available. Had to get one of each color!

little column A, little column B would make things more fun

Not going to bore you with the details, just a real nice piece. One of my favorites. Click on pics for details.

Whats hex or non hex wheels mean? "Hex" and "non-hex" refers to how the wheels mount to the buggy. Hex has a hexagonal shape molded into the mounting surface. That fits over a hexagon shaped piece on the end of the axle. The bearings are inside the hub. There are a few hex sizes...