RC10Talk - The Net's Largest Vintage R/C Community

Back in 2010 I got returned to the hobby. My wife surprised me with an SC10. This was neat, but all I could think about was the original clodbuster I had back in the 80's. This lead to buying a new super clodbuster, and discovering how many mods had come and gone while I was out of the hobby. I buil...

After many mods and builds (and re-builds) and basically going all-out for speed and performance, all while stubbornly insisting on using as many (stock) tamiya/clodbuster parts as possible, I came up with this. It is an extended chassis dual-brushless build that I did in early 2012. What follows is...

Axles and suspension in place. This is all CPE old-school clod 4-link. The shocks are GTR 3.5" from a traxxas jato, I would switch back and forth between them and 4" shocks with this truck. Looking back I think I could have done a better job with the suspension, but I hadn't learned that y...

Here it is almost done, notice the extra bracing: The extra rods across the shock towers are short clodbuster steering links. The 2 long rods forming an X-brace are the long clodbuster steering links. The 2 pieces of at either end of the X-brace are strips cut off of stock clod electronics trays. Th...

Proline F-650 body. I can't take credit for the paint job. It was another deal I stumbled into and didn't even know it would be the perfect wheelbase match for this build when I bought it, but I'm happy it worked out that way. Not pictured, but I put foam "bumpers" on the inside up front t...

So, as a snow-runner the truck was pretty hard to beat, it was definitely in it's element and I had a LOT of fun with it that winter. 424304_358437850857635_1655544864_n.jpg I would later try different shocks and tires as I experimented with learning how to handle the truck once spring came and it h...

Ultimitely .... the truck was too fast/powerful for it's own good. With traction on "not-snow-covered-ground" it quickly started breaking parts. It started stripping the pegs off the wheels and I had to make my own pegs by putting 3mm nuts and bolts with spacers in of all the wheels. Suspe...

A few vids of it in action: https://www.youtube.com/watch?v=29VfZ9_4b3k 29VfZ9_4b3k https://www.youtube.com/watch?v=Nbjs_6nKhBY Nbjs_6nKhBY https://www.youtube.com/watch?v=pPC7k0lbnM4 pPC7k0lbnM4 https://www.youtube.com/watch?v=23QMvaQ2yZY 23QMvaQ2yZY https://www.youtube.com/watch?v=Ot0buDOgR1k Ot0b...

Hi Dave,

I don't remember if me and Chris competed over at this spot, I know we sure did at the old place.
The old place was the one that had the "construction zone" dirt piles out back.

I had a lot of fun with that truck, and learned a lot too.

After a break-in running a 2S battery, I put both screws back into each of the "wings" on the ladder bars (I had previously removed one from each wing). Doing that seemed to make things better. 2S got boring pretty quickly, and I switched to 3S. That was a LOT more to my liking. Then I tri...

By 2018, I finally got around to putting a new body for the Super-Stocker.... about time since it had never had anything but a used one on it. Unknown body (I got in a parts-lot), I think it's a pro-line Tundra body for the t-maxx 2.5 if the writing on the bag it came in is to be believed. It came w...