Look what we have here In addition to my self airbrushed Naoto Matsukura replica i asked bittydesign to do a Masami replica. Their skills & quality are terrific !!! Completed model as soon as i finally get some modern yoke stickers (help always welcome, feel free to pm offers), see the body for yourself:
And that's the original:
img_86962_31940203_12.jpeg (35.05 KiB) Viewed 763 times
img_86962_31940203_12.jpeg (35.05 KiB) Viewed 763 times
as usual, it took me ages to take pics of the car (i think i posted the body a year ago or so). I have not been around alot during the last months and thought i had to do something about that:) Here we go, as this was one of the last...
A while ago i retired my Yokomo B-Max 4 Factory for a newer worlds version and created a Masami Style replica based on the car he used on the Thank you event around 2009.
I have just purchased a Bmax4 factory kit from Adam over here in Australia. Would like to spend some time getting to know this car and need to hunt down the original lexan that came with this first model bmax
This is a body i airbrushed myself for my B-Max4 factory. Naoto Matsukura style, but in flourescent yellow rather than the non-flourescent tone he is sporting.
Hi my fellow Yokomo addicts ! It took me nearly a year to take these pics, but at last i was finally able to build a new Works 93 and an MX-4. In addition to that i cleaned up my comepletely mint YZ-10 Pavidis i bought some time ago. Pics of the...
Last post
That paintscheme does a good thing to the body.
It is difficult body to get a goodlooking scheme on with the forward cab and the air inlets
A while ago i built a Yokomo MX-4, in the form of a not so well known late Masami MX-4 version. At that time he already used a modernized body design which most people know from the B3, MR-4BX and touring cars.
IMG_0847.jpg
IMG_0845.jpg...
Last post
I dont think anybody make old school battery packs anymore. You'll have to get a newer stick pack and rebuild it how you like.
Actually, I know that Gens Ace makes 2S LiPo packs that are very close to the size & shape of old-school NiCad/NiMH...
Hi my fellow Yokomo addicts ! It took me nearly a year to take these pics, but at last i was finally able to build a new Works 93 and an MX-4. In addition to that i cleaned up my comepletely mint YZ-10 Pavidis i bought some time ago. Pics of the...
Last post
amazing buggy, can i ask does this have the aluminium front and rear bulkheads or are they magnesium
Hello there i'd say they are the magnesium ones but i can have a second look if you want? Looking fresh, don't they? :) All the parts have been...
you knew this had to happen sometime :). I thought i cannot leave this kit sitting around in the garage and have therefore chosen to start a build project that i'll document as far as possible for the past.