I was going to start disassemble and clean my 10T when I had a thought. Do I have enough spare parts to put another tub together? The answer of course was yes. It may not be pretty or complete(yet) But it has some cool stuff on it.Nothing was cleaned it was just put together with parts that came with some purchases for other parts. The tub is an stamp pretty scarred up, so I won't mind drilling it for the stealth.I mostly just plan on letting it sit like this until a) I need a part or b) I just finish it and run it with some modifications.You know the usual stuff B44 cvd's,2.2 wheels and a 17.5 brushless setup.
Thanks Johnny I picked up some AE turnbuckles today so i can put the polished one together and get some more pix up. The gold tub is gonna be a fun racer. Gonna try and race both of them in stock class. The only requirements for that class are a 17.5 brushless.
Even though this is technically a buggy, I'm doing a truck conversion with it.
The plan is to build as much of it from my parts/junk boxes as possible. Of what you see here, the transmission ($40 parts trans)and rear control arms are the only...
Last post
Lookin' good! At first I thought this was gonna be a straight 10T build but it's more of an old school conversion! I fondly remember the truck conversion wars from bitd. I snapped up an Eagle right when they came out. Looking back on it now, all it...
well the chassis i had from a ebay parts lot buy which was swiss cheese. so i took some extra parts i had and built this. s&k battery holder, s&k frt bumper, a&l steering, andys arms, andys frt bulkhead, hyperdrive belt drive, buds wing, revtech...
Last post
thanks! ya right time right place with the right parts :D
Heres the second car I worked on this weekend. Its assembled using a bunch of aftermarket spare parts I had laying around. The only AE parts are the 6gear tranny, bulkhead, shock collars, dog bones, body post and front suspension mounts. The rest of...
Last post
Carbon turnbuckles on the front?
What the dilly yo?
look like carbonfiber tubing slid over the allthread.
Lookin good fastang. Its amazing how you can gather enuf parts to build several cars :?
Todd
I would like to show you all my custom aluminum chassis spare parts build.
My great friend/mentor, Fastang, assisted in this build, with parts he shared with me. He works at a water jet company that made it possible to cut this chassis. Together, we...
Last post
Nice, I was wondering where you had the carbon made up before I read too far in. Nice project and great idea. What's the chassis thickness?
Ever since I got my Lazer ZX new I've always wanted to do a 4wd RC10. I've also always wanted a mid motor RC10 and of course something super fast. We were pretty fast back in the day but with todays bruchless setups it's seems even more feasible....
Last post
unless I missed it, what material did you use for the 3d printed arms? And general printer settings? I always wanted to try printing my own arms (which would involve me stopping playing w/ RC cars and finish my new 3d printer or at least fixing the...
Update: I'm going to enter my spare parts sprinter in the low buck build off, seeing as I'm pretty broke right now I can't spend much money on it. I'm going to list all my parts sources and include all the prices I can which will be in the first...