Someone might have to confirm this is for a 10T and not an LXT because I can’t remember if they are different. If it’s what you need I can take it to work and copy it with a ruler next to it and you can scale it as needed. I don’t have a scanner or a PC or anything.
And as for the bodies, I think both standard and team bodies will clear the top plate just fine. But a side exit exhaust will almost definitely be a no go with the team body and the wide upper plate.
well since i had an extra duratrax chain dirve setup i thouigh this would be cool to build. chassis still needs to be drilled so the parts can be screwed down. waiting on some more parts to finish it up. DSCN4590.jpg DSCN4589.jpg DSCN4588.jpg
Last post
Crazy how time flies. I knew these pictures looked familiar, then saw I replied to this thread, I looked at the date of the thread. Wow I can’t believe how long ago some of this stuff was.
thanks again dhood for this truck and the new reanno chassis came out perfect. topped it off with a andys rc10t body. DSCN4741.jpg DSCN4742.jpg DSCN4743.jpg DSCN4744.jpg DSCN4745.jpg DSCN4746.jpg DSCN4747.jpg
Last post
Thanx. Kinda figured that but then in the long run why not just run a ribbed tire then is why it didn't add up with the voices in my head... 8)
I'm currently restoring a RC10 Duratrax nitro truck conversion. Of course I'm missing a few parts and I was wondering if anyone has any photos of a complete conversion or copy of a manual for this. Any help would be much appreciated.
Will these work for 2.2 wheels and slip on the original rear RC10 without modifications? I was looking on e-bay and it was stated they would work. Any help would be great if anyone has tried this.
Thanks,
Last post
Thanks Todd...I'm going to get a few pairs and try them out.
hey guys theres a rc10 i am interested in purchaseing its claimed to be a duratrax nitro conversion with 2wd with chain drive. is this a real deal or someone not knowing what their selling? its a heap but id take the chain drive and chassis and...
Last post
no hard feelings here then and im going to purchase a section in the vendors spot to take care of it. the paint i offered i didnt charge anything but paint im actually loosing money. i have no problem throwin an offer out but its hard to say a guy...
Thought you guys might be able to make use of this. I picked up this kit about 3 years ago and its going into my next rail build. Its a very early nitro conversion for the rc10 pan cars. Since this site has limitations on image size I build a page...
Last post
Thought you guys might be able to make use of this. I picked up this kit about 3 years ago and its going into my next rail build. Its a very early nitro conversion for the rc10 pan cars. Since this site has limitations on image size I build a page...
I just purchased a set of duratrax bx front rims and nitro rear rims for my RC-10, like scr8p recommended in his topic .*Parts needed to run modern 2.2 rims/tires on your rc10* . I followed what SteveK did, in his reply on this topic and did a...
Last post
Cool tutorial. I had to ream out the center of my Duratrax wheels to fit the 3/16 axles too.
I actually thought about taking all the 1/4 axles to a machine shop and getting them turned down to 3/16 , but I think they are too small near the threads...