question for tamiya experts - grasshopper II tires
- germanrc10gt
- Approved Member
- Posts: 134
- Joined: Wed Aug 22, 2007 11:59 am
- Location: near cologne/siegen germany
- Been thanked: 1 time
question for tamiya experts - grasshopper II tires
hi
a friend of mine called me today and asked me for some new tires for his
grasshopper II. he is living around 400 miles away from me so i couldn't
tell him give the wheels to me to me and i'll try if any of my vintage tires fit your wheels.
thought anyone of the vintage tamiya collectors in this forum could help.
i think these tires should be around 1.9" front and maybe 1.7" or so rear, right?
does tower e.g. still have anything for that rim size? thank you.
volker
a friend of mine called me today and asked me for some new tires for his
grasshopper II. he is living around 400 miles away from me so i couldn't
tell him give the wheels to me to me and i'll try if any of my vintage tires fit your wheels.
thought anyone of the vintage tamiya collectors in this forum could help.
i think these tires should be around 1.9" front and maybe 1.7" or so rear, right?
does tower e.g. still have anything for that rim size? thank you.
volker
- mrlexan
- Approved Member
- Posts: 6250
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 12 times
Re: question for tamiya experts - grasshopper II tires
I have a NIP set right here close to my computer.... they measure 1.9.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
- germanrc10gt
- Approved Member
- Posts: 134
- Joined: Wed Aug 22, 2007 11:59 am
- Location: near cologne/siegen germany
- Been thanked: 1 time
- highwayracer
- Approved Member
- Posts: 1187
- Joined: Wed Dec 12, 2007 9:43 pm
- Location: Illinois, USA
- Been thanked: 6 times
Re: question for tamiya experts - grasshopper II tires
hello,
The Grasshopper 2 came in 2 different versions:
White wheels (7 spoke) - Same as Tamiya Striker and Falcon (falcon was molded in yellow). The official tire size is 1.7 inches.
Yellow wheels (round holes) - Same as the Tamiya Fox, Hornet 2, Wild One (all had different colors). Rears are 2.0 and fronts are 2.1
Both sizes can be found, but new 1.7 inch tires are very rare. The first thing to do is to find out which wheels came on his car. Below is a picture of my Grasshopper 2 with the 2.0/2.1 wheels. My wheels made by CRP but identical to the Tamiya version (except in color).
Regards,
highwayracer
The Grasshopper 2 came in 2 different versions:
White wheels (7 spoke) - Same as Tamiya Striker and Falcon (falcon was molded in yellow). The official tire size is 1.7 inches.
Yellow wheels (round holes) - Same as the Tamiya Fox, Hornet 2, Wild One (all had different colors). Rears are 2.0 and fronts are 2.1
Both sizes can be found, but new 1.7 inch tires are very rare. The first thing to do is to find out which wheels came on his car. Below is a picture of my Grasshopper 2 with the 2.0/2.1 wheels. My wheels made by CRP but identical to the Tamiya version (except in color).
Regards,
highwayracer
- mrlexan
- Approved Member
- Posts: 6250
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 12 times
Re: question for tamiya experts - grasshopper II tires
Those look alittle big on the rear highway.... These are the box art wheels:
- Attachments
-
- tam-555024a.jpg (54.15 KiB) Viewed 3506 times
- tam-555024a.jpg (54.15 KiB) Viewed 3506 times
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
- highwayracer
- Approved Member
- Posts: 1187
- Joined: Wed Dec 12, 2007 9:43 pm
- Location: Illinois, USA
- Been thanked: 6 times
Re: question for tamiya experts - grasshopper II tires
The ones on my car are the 2.1 / 2.0 version. My Grasshopper 2 came with yellow wheels originally, but I thought the color stood out too much, so I went with the CRP version. In addition, I decided to use some Schumacher tire knock-offs.mrlexan wrote:Those look alittle big on the rear highway.... These are the box art wheels:
The wheels you have were the ones that came with the early version of the Grasshopper 2 (and they do match the box art). Those are the same wheels Tamiya used on the Striker, Sonic Fighter and Falcon (in yellow).
Regards,
highwayracer
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 2575 Views
-
Last post by tamiyadan
-
- 2 Replies
- 1047 Views
-
Last post by ca-rj
-
- 5 Replies
- 2527 Views
-
Last post by shodog
-
- 1 Replies
- 1067 Views
-
Last post by tuna.Rc
-
- 19 Replies
- 3181 Views
-
Last post by REMJ666
-
- 12 Replies
- 2204 Views
-
Last post by Woobie
-
- 1 Replies
- 4118 Views
-
Last post by R Cane
-
- 14 Replies
- 1490 Views
-
Last post by RogueIV
Who is online
Users browsing this forum: No registered users and 6 guests