Getting into the drag race scene in the latter part of the 1990's BoLINK introduced it's Prostock (1999) Funny Car (1998) and Econo Rail (1997) kits all based on flat plate FRP chassis designs. 1997 was also the same year BoLINK released the Muscle Cars line, built on a modified version of the Sport 2000 chassis that appeared in 1996.
A few pics of my Bolink drag chassis with a '70 Mustang body. Astroflight ESC along with a Top Fuel II motor.
If anyone could direct me to a source for the battery trays for this car, I'd appreciate it! Also need a pair of the Astroflight zero loss...
Last post
Do you need the lexan battery mounts with the moulded mount to that gets glued between the cells? I have a pacjage of them around here some where. I would send it to you No Charge if It's the correct one.
Bill C
Following up the BoLINK Christmas Ads is... another BoLINK Christmas Ad! Put it here so you can see it compared to the 20th anniversary ad that ran earlier in the year. Both feature the 91 SPORT chassis which replaced the Eliminator Sport in...
Last post
That Ranger is awesome! Thanks for posting. I had not seen that before.
The BoLINK Nitro Racer was a gas powered on-road/oval track car released in 1999. This ad also featured the RACEtech G-Force electric oval racer as BoLINK acquired RACEtech in 1998.
BoLINK Stock Car Ad 2000.jpg
Last post
Huh... I wasn't aware of that factoid either. I've always known the Apex10 existed, but never looked into what it was specifically in any great detail. Pretty cool stuff for sure. Bolink also had another nitro pan car that came out a year after the...
Anybody else into drag racing ? Heres some pics of my new car for the 2012 season, going to be running in alot of top sportsman shows up here in the northwest !
Here it was before it went to the paint shop
Last post
Kenny Delco the 1990 Gatornationals Pro Stock champ is my uncle in-law . That's my only connection to drag racing. He is a super cool dude. A give you the shirt off his back kinda guy.
I had a '69 Super Bee with a 383 Magnum for a few years when I...
The problem with the nova and many other bodies, is the front end catches a lot of air and deforms past 50-55 mph. A body mounted splitter will make this worse. Mount the front of the body as far forward as possible and brace the area behind the...
i got this this week shouldn't have but hey early christmas present :?
i have seen this chassis somewhere but cant remember where any help would be great
i think the front is a bit to wide maybe if i put some wider slicks on the rear ?
Anyone have any info on these? Can someone on here possibly 3d print a chassis?
Thanks
20200213_154231.jpg
Last post
It may be easier to just make a chassis from sheet metal. Just a few straight line cuts, drill some holes and a couple bends and you're done. Just a thought...