RC10Talk - The Net's Largest Vintage R/C Community

scr8p wrote: ↑Thu May 01, 2025 1:42 pm I think the "no copies" sticker is a hint of something to come in October. Could be wrong...

Wasn't that a proline sticker?

I do have a set!

Track day report- Buggy wasn't bad, had some issues with the 25* castor blocks making the car tight in the center of the corners and slow to release the rear end so I could square up for the 3 sets of doubles. I would normally increase the rear tie rod length to get more rotation, but I'm limited by...

GoMachV wrote: ↑Mon Apr 28, 2025 5:05 pm Wow look at all that ip theft
(Ok trademark, whatever )

Listen...from the guy that traveled forward in the future to copy the AE 4WD RC10 and call it the 4 Ten years before it was released....

Stickers for Miles new B2 and T2 bodies

And...12mm Losi XX front spindles

Screenshot_20250427_194133_Gallery.jpg Shakedown run today. Truck is really really good. Didn't have to do anything from my baseline setup be turning high 12s laps (the 13.5 modern trucks are hitting high 11's) zero issues, zero broken parts. The track was very dry today, even after watering it the...

What are you planning on doing with it? XXt CR Graphite plus is a very capable vintage race platform. Transmission cases are weak spots, Jeff at Factoryworks.com makes a very cheap.trans brace tab that helps safeguard the cases (unless the T plate breaks too....and they can.... then both are trashe...

Coop wrote: ↑Thu Apr 24, 2025 10:03 am I was afraid about the trans and the rear pivot plates I wanted to get a trinity trans brace but their 60 bucks on eBay

Factoryworks.com has a great carbon fiber brace for about $20! DPRC has the rear CR type Tplate Milled PA66 nylon for $24. Don't sweat it!

What are you planning on doing with it? XXt CR Graphite plus is a very capable vintage race platform. Transmission cases are weak spots, Jeff at Factoryworks.com makes a very cheap.trans brace tab that helps safeguard the cases (unless the T plate breaks too....and they can.... then both are trashed...

Dustydrone wrote: ↑Wed Apr 23, 2025 5:44 pm Any guesses?

Screenshot_20250423_144208_Instagram.jpg

More -30mm Cut-N-Shut tires for the RC10T2 and XX-T CR

Nice! Not $459 nice, but nice. I'll wait for the B3 re re I don't remember where I heard it but apparently there will be a b2 this year. It only makes sense, most of the fast guys in the vintage scene (for AE cars at least) are rocking B2 or B3 buggies. Granted most aren't racing these Re Re cars, ...

Nice! Not $459 nice, but nice. I'll wait for the B3 re re

Slight body rework, lots of old Novak stickers and sticker residue everywhere. Liquid wrench to the rescue for that. Purple splatter overspray all over the outside of the body, denatured alcohol for that. Added some white window outlines and a few stickers, a rear wing with an old Team Losi Performa...

Rattlecan'ed a shell for the XX-CR

RC10Talk - The Net's Largest Vintage R/C Community

Search found 7989 matches

Re: The Kinwald Edition RC10 (it is here!)

Re: Double X CR modern racer

Re: Double X CR modern racer

Re: So what did you get in the post today ???

Re: So what did you get in the post today ???

Re: Losi Double XT CR Modern Racer

Re: Xxt graphite plus runner

Re: Xxt graphite plus runner

Re: Xxt graphite plus runner

Re: What is it now Team Associated?!

Re: So, what did you do RC today?

Re: Possible Kinwald Edition RC10 inbound?

Re: Possible Kinwald Edition RC10 inbound?

Re: Losi Double XT CR Modern Racer

Re: So, what did you do RC today?