RC10Talk - The Net's Largest Vintage R/C Community

I've searched , only 3 posts came up with the name but no relevant info in it. I saw a few builds with the HPI CAMARO body and the specs seem similar CAMARO: Length: 16.25" (413mm) Width: 7.9" (200mm) Height: 3.5" (89mm) Wheelbase: 10.25" (260mm) Pantera Length: 18.5" (470mm...

The nose is different from a buggy? Oh no bueno. eBay it is I guess

Anyone make DS arms? Need 2 front and rears. I've been droooling over these DS's but unable to find and that are reasonably priced. I have a custom on road car I'm making out of a old gold pan, and have a buggy resto that needs finishing. I have found the shock towers and some other parts, but was w...

This one's pretty funny, took his dad out for a ride:
http://www.youtube.com/watch?v=Xa6_mO3NAO8

That's Nucking Futz but cool non the less

His site:http://www.rogueelementcomponents.com/ , Examples of his work:http://www.scale4x4rc.org/forums/showthread.php?t=2521

He's a very funny guy too

I just have shelves in my garage. I cut a piece of PVC pipe long enough to keep the tires and suspension off the shelf, that way I dont get flat spots

Did they make ones for the rear? I searched "technacraft" on ebay and nothing came up

Just found out that I have some. Been looking on ebay for parts for my buggy and stumbled across one and it had the same ones I have. Is there another company that makes titanium ones? I ask because I only have them up front. the ones that were out back are just the black steel ones and I'd like to ...

Just got a bunch of more things in, are the AE carbon fiber chassis pretty rare? What about RC10T cvd's? Man must be my lucky day because this deal also got me a full stealth tranny,cvd's bunch of new tires and other parts for my Buggy. I should have a runner soon STOKED

Where can I get the cover for the motor plate "clear lexan dust shield" also will a 6 gear tranny motor plate bolt up to the stealth case? or do I need to get a different one, if so which one would that be? Very RC10 illiterate

Yeah, go with the start box. My buddy ran a tiger drive until the hex stripped out in it. (about 20 seconds of turning on an almost new engine) :| Probably used a cheap hex, or wrong sized one. I had tiger drives on a few of my O.S engines and never had a problem other than a little oil from the ba...

looks to be carbon composite. Retrofit tranny conversion, that something good or bad?

I mainly use WD-40 for any sticky residue, servo tape, decals, stickers, etc. Works well

Thanks I don't have access to the BST forum so I cannot gauge how much they go for and I already looked it up on ebay, which they don't have any rollers, just parts. Thanks for your infinite Wisdom