RC10Talk - The Net's Largest Vintage R/C Community

RC10B1.5 resto mod. The buggy that was meant to be but never happened and would have complimented the T2 nicely. This one started as a used, stripped down, left for dead T2 sport chassis from ebay that I picked up with the intention of making a modern "woin" racer. Highlights are a shorten...

Entering my Kyosho Pro-XRT stadium truck. Picked this up early 2021 and spent a little over a year collecting needed parts before starting the build process. Finished the build and installed electronics a couple years back, and just recently finished the body which is a TBG repro with MCI decals. Tr...

My VONATS paint transferred over the the JRX Pro body pretty well, of course I made the windows twice their molded size- The problem is the Flourescent yellow Losi decals I have are too small....and so I'm going to put off what I'm going to do eventually... But I do hate cutting into an uncut origin...

In mid August I stumbled across a Youtube clip called “Losi´91 Detroit Conversion Kit – First Track Test Day” published by Grand Prix 3D. After watching the clip a couple of times I emailed Andrew at GP3D and placed a pre order for at kit. I still remember taking the bus to the magazine store every ...

Hi All, I have been restoring a few vintage Losi cars and trucks - JRX2 (JRs Choice Motor) JRXT (MTM Motor) JRX Pro (Slot Machine Motor) and nearly done with an LXT (Mighty Motor/Trinity) I have all period correct speed controls in each car/truck. My question, what radio should go where. I have the ...

My JRX2

My LXT - Work in progress

Just a little more. Mounted some fresh tires to break in, thanks to Teshreve I have 99% of the springs and extra shocks I was looking for (like to be able to just swap entire shock packages into the car during testing). Still have more to go

DPRC just realeased some CVD kits for our Old Losi buggies! Screenshot 2024-11-28 155741.jpg Screenshot 2024-11-28 155816.jpg https://www.dragonpunchrc.com/shop?Category=New%2520Arrivals Just a note, these are for XX equipped buggies, the description on the page is wrong and mentions trucks and LRM ...

New XR10 G2 100A HW speedo, ROAR 21.5 HW G4r (until I hear we can run the Outlaw stuff anyway). Buggy feels super solid, should have a track report in a few weeks, but my bench setups are usually very close to ready to race so we'll see. I am going to share transponder between my 17.5 and 21.5 buggi...

Superb paintjob ! That Jrx2 is familiar to me

Quick update. Chassis machining not finished due to the machine is being moved. Gearbox housing have been modified by removing the attachment points for truck body mount. All hardware is being cleaned right now. I have collected everything I need besides the original "short" ball cups. 202...

I'm in the process of finding the right stuff to put on the car. I do have a set of the original gold/bronze hard anodized front shocks on my JRX-Pro. But they belong to that car so they will stay there. I chose to use a set of the darker shocks from one of my xxxt:s. 20241229_084250.jpg I just had ...

Hello, it's been awhile since I've posted here. I wanted to show a very special car body...It's a tribute to my "brother from a different mother", Ramiro Padilla. Recently, I spoke to his brother, and was inspired to do do this project. The body is a JConcepts Mirage, mounted on my shelfer...

Very nice! I like that paint job as well. Thanks! :) I have a couple of variants using these colors. 20250107_184351.jpg My rear motor 22 "1.5" runner, the '91 Worlds and my runner XX (ongoing "cr" update, hence no front spindles and no rear end). Is that an original pro se body...