RC10Talk - The Net's Largest Vintage R/C Community

Got a Hydradrive for mine! https://live.staticflickr.com/65535/54533798584_d12e8b3e55_b.jpg Nice bits in that box I got that in a lot with a pan car I bought along with a JRX Pro chassis. Been trying to figure out what all I got as my knowledge of it just isn't there. send me a PM with all the part...

Tinkering around with an adjustable servo mount.

I'm just getting my feet wet in vintage R/C restoration. I managed to find an old Trinity ev10ss LSD on ebay that needs plenty of TLC and I'm looking for a little advice on a problem I encountered tonight. I started taking the rear end apart and discovered the left-rear bearing has seized onto the g...

Nice, I look every day on Ebay for Trinity cars and other pan cars so I must've missed this one. I have one myself that I'm trying to restore even though it was already like new almost. I think I discovered lately though that it has the wrong axle in it but I don't see me finding a LSD axle either....

DSaw78 wrote: ↑Thu May 22, 2025 9:47 am I just found an axle on Ebay actually, the left side is shorter than a typical axle. The rear pod is wider on the LSD than a standard oval rear pod.

Just found the axle and snagged it. It'll be so much easier to fix this with a backup! Thanks for the heads up!

Nice, I look every day on Ebay for Trinity cars and other pan cars so I must've missed this one. I have one myself that I'm trying to restore even though it was already like new almost. I think I discovered lately though that it has the wrong axle in it but I don't see me finding a LSD axle either....

I think i stalled out waiting to find some other purple parts...haven't looked at it in al looooong time. I ran one of these for almost a month on indoor paperclip shaped carpet oval. The lack of RR weighting in the corner was it's demise for me, the car got into the corner like a rocker but never h...

Looks like his car had staggered rear caps, would explain the hub difference. A local Trinity driver had a host of different hub widths for the Evo10 SS...so it's likely a one off on Joel's car

the hydradrive/slipper top shaft will work in either. I do highly suggest running a slipper on this car at the very least if you're going to drive it, the diffs in the LRM have been known to melt pretty easy if used as a slipper.

This must be my like 35th or so grasshopper/hornet build lol. I kinda didn't know where to stop, it almost didn't get the aluminum gearbox but I'm so glad I did it. Then I started thinking about the aluminum chassis too but I think that's too far :lol: As with most of my recent rere Tamiya builds I ...

Well, quick update. I was able to get the bearing off without severely damaging the axle. I purchased a small rubber mallet, taped up the axle, put the axle in a vice, and gently tapped on it. The bearing started moving with a few moderate taps. The bearing was definitely messed up. Even after I got...

Got notification that my kit has shipped so people should start seeing them roll in. We'll see how the kit is soon.

DSaw78 wrote: ↑Wed May 28, 2025 5:12 pm Looks like maybe a RC10T Team or Cliff Lett edition next?

This. Good God. They don't stop

Thankfully the new higher price point for re-re's was set by the Kinwald and the Graphite. Ugh.

DSaw78 wrote: ↑Thu May 29, 2025 11:33 am Pre-order is up, $419.99. So less than the Kinwald and graphite.

Dang it!!! At least it's got some upgrades over the standard 10T kit.

Maybe it's 4wd too! It has rear wheels in the front!
.