RC10Talk - The Net's Largest Vintage R/C Community

Thanks JWScab, you're right! I just found a list of parts here... Page 1 is the parts legend and my 1989 RC10 Graphite is "b" and sure enough, on page 2 it shows Protech II with Part #: 6173. I can't find it anywhere online but I'll keep searching for it. The wing is Part #: 6184. Thanks a...

There are many ways to approach this from home anodizing to sending to local shops etc, but the name I see come up more than any other for RC anodizing is Batemans Custom Coatings. Lots of feedback on ebay. I do not have personal experience or contact info.

I thought EasyOff oven cleaner and a scrub pad followed by a water rinse were the best way to remove anodization without damaging the surface finish.

With leaky carts this will keep oil in the shock long term lol I am still waiting on printer parts, upgrading my ender 3 pros to 4.2.7 main boards and adding the cr touch kits to them. I did buy a new vintage car on ebay myself... well used. Almost looks like someone found it in a closet from their ...

Some discussion here:

https://www.rc10talk.com/viewtopic.php?p=533702#p533702

Hi All, What aftermarket tires (front and rear) will fit the original stock rims? I believe the Kyosho Sand Super tires will but want to confirm and see if any others fit. Thanks a bunch... I'm pretty sure that the old Mud Star tires fit. The new Sand Super tires from the re-re's are different. The...

I finally have steering parts to model

Jrxt and Proformanance set. It's early as it doesn't have the servo saver cutout. I think the Pro's all had the cutout. Nice find!

Oh nice! I have been working on a xx buggy chassis to shrink to 16th scale myself. I was thinking of redesigning those bellcranks a bit to eliminate the bearings and servo saver when I shrunk them I'm planning on changing the design a bit to try and emulate the worlds prototype's machined look. Sho...

Finally had time to figure out my solidworks issues and made up a non slipper spur gear that CLM was looking for. Hoping the test print works out OK then I'll publish it.

First Try!

Fits well and seems to be usable with no gear mesh issues.
https://cults3d.com/en/3d-model/game/mini-jrx2-jrxt-replica-spur-gear-no-slipper-slipper-eliminator

I'm sure the driver had a lot to do with it.

Painting is the poor man cutting corners method. Either purchase new shock bodies or have them re-anodized by Bateman's.

If i can get the dimensions i can quickly make you a stl file for the adapters.

BattleTrak wrote: ↑Wed Jul 26, 2023 3:41 am CRP made bearing adapters too.. #4112

Actually available:

check here