RC10Talk - The Net's Largest Vintage R/C Community

(Proto Cougar Detroit Report part 1) Okay, I haven’t released too many projects lately, but… there is a good reason! 😅 As we all love old RC racers, and a benchmark of vintage racing was the Detroit Worlds 91’… we all know who won it, for 2WD. 😉 This has been confirmed al lotta times, with the stunn...

So, I wasn't really happy with how the XXX-SCT Buggy rod ends fit into things, particularly with it interfering with the slipper cover and the added mix of parts, so I took a chance on the TLR 22 ball studs with the 14mm long thread. I got lucky and it was JUST long enough to fit through the bulk he...

You are not authorised to read this forum.

Well, if I just would have looked a little further down the Losi forum than my own posts, I would have found BattleTrak's post about the steering enhancement kit and the camber hole comparison! - https://www.rc10talk.com/viewtopic.php?f=27&p=542022#p542022

(Proto Cougar Detroit Report part 2) Well… here i am again, this time i hope i can write some more detailed information about some parts, and the actual start of the build. As said before, i have been collecting the parts for about 2 years, and two months ago I started this build (see report 1). Now...

I bought new axles, which of course were the same, BUT they came with (genuine) Losi nylon nuts, which are thinner (than the aftermarket ones I had) & now they're nice and flush... So I can stare at my pristine LXT on the shelf and smile

Losi XX Modern

Build thread - https://www.rc10talk.com/viewtopic.php?f=27&t=46061

Got another package; a trade from my good buddy Jason ( Bormac )... All the sorts of stuff that I love to collect: 20221118_153213.jpg From left; a boxed Tamiya TT01 Ford Escort Cosworth, a Tamiya M04 Mazda MX5 (Miata), and a HPI e10 (without body). All have the gear included to make them ready to r...

Got a delivery from Jeff.

Battery strap for the FXT, towers for the TQ10, extended tower for a Stampede, and chassis braces for both Stampedes.

Inter-Fab Viper EX-10. How cool is the quick change battery tray?

CA/Super glue is what I use to repair edges and chips. I just repaired the tail on this JRX2 chassis. I went over the area with a black Sharpie, built up a few layers of glue then just lightly sanded to smooth and knock the shine off of the glue. I didn’t go too crazy making it perfect because I pla...

I changed the rear arms back to graphite XX/XX4 arms.

I also installed a Rusti Designs rear pivot support. It is a nice piece made from thick carbon fiber and a printed piece. It's meant to prevent the pins from popping out during a crash.

Found this out while tearing down a parts truck. It appears later on in the production cycle Losi modified the LXT camber link locations on the front shock tower. A1014 for the Pro SE had running changes as well. Here are the three camber link versions that I know of. I have compared it to the Jamm...

The Jammin I have on file has camber link holes higher than the highest one on the two of the three variations I have

As anyone who has tried to use Andy's front arms with .71 shocks knows, it just doesn't work. Unlike the newer AE and RPM arms, they don't have the outer holes. While putting together information on different shocks, I noticed that the length difference between .56 and .71 shocks was very close to t...