RC10Talk - The Net's Largest Vintage R/C Community

Changes the camber and at the same time will change the width as a side effect making you need to adjust your tie rods.

Something ain't right about that wellnut. The threaded portion should be at the small end, and it draws that towards the thick end. Is your front one the same? The screw length hasn't changed since the original kit.

Edit- going by your wording, I think your doing it wrong. A wellnut is attached to the screw first, then the radio box is slid over it, then you tighten the screw to draw the wellnut tight. It doesn't go "through" the radio box.

The pieces you point to in the last post are caster locks, and yes I would adjust the holes to the manual and rotate them to set the caster. By shortening the links you change the caster gain and while it's likely not a huge deal, you could get further out on other adjustments by fussing with it. Th...

Ok cool, and yeah it's a weird way to do it but way old school. Good for a little bit of impact resistance.

Incredible_Serious wrote: Don't make me come over there....

Problem solved, when you return home just take the stuff with you! Free delivery

This is 2024, your lucky to get tires and wheels in the box these days

I would be willing to bet that it costs as much or more for them to include the oilite bushings. It's original, only one of the kits, the 6016, came with bearings bitd and it was a steep price difference. I personally like it as a reminder of where we came from.

I'm shocked that they haven't adapted to running on beer

I read that and my first thought was that they were not including it but I have convinced myself they are doing that for another reason- collectors don't want to open the box. This way they can see the manual without cracking the seal. I could well be wrong, but to not have a manual included would b...

I'm seriously considering this one!
San Jose is about a 12 hour drive, but the closest vintage race I'll ever be able to attend im certain

Brendan2904 wrote: ↑Thu Apr 18, 2024 12:05 pm I'm not allowed to go to California. My wife says my big mouth will start an incident.

I hear that! Coming from Idaho I gotta make sure and peel off my political bumper stickers and pull the AK out of the back window

because reasons....

How did you get the SRT steering to work with the Factory Works steering? My setup seems to have some flaws. If you are using the SRT steering rack on our factory works SRT-r chassis set, the spacing between the holes is different to accommodate the rustler components. The rack bar included with th...

Sweet!