RC10Talk - The Net's Largest Vintage R/C Community

i found a few setup sheets for the b3. i'll be giving these to arn0 over at petitrc. if he makes any changes to any or puts them in pdf form i'll update this thread. team associated b3 setup sheet from the rear of the instruction manual http://farm8.staticflickr.com/7309/16507034942_4439af9369_b.jpg...

Finally got her painted, now to get some correct stickers. I'll take some better photos once it's stickered up.

Thread update! :mrgreen: The E-gt is now done, just in time for the Vonats. This was a collaboration between Jason Ruona and myself... coming up with a plan for leftover parts after a string of GT restorations. Here's a little rundown: Chassis reano'd blue JC Hi-Flow T5m body (modern twist on an old...

I'm just trying to help and share 30+yrs or experience with RC and 20 years of racing more or less competitively. 1- we are not talking full size cars, here, just toy cars. The full size example you are quoting doesn't apply here, because the cost of a full-size, no-holds-barred 1:1 race car is doze...

Put a big DONE stamp on this build. Going to the track next week to let it eat! Keeping this one forever! Thanks for all the comments!

Fist off, eff you Photobucket and your stupid watermarks, pop-ups and general trickery. Since my local off-road track closed more than a year ago, I converted my Re-re World's car into a parking lot racer like I always wanted to do as a kid. I got some Pro-Line cone dish wheels from scr8p, wrapped t...

Well, I'm revisiting another old project here. Decided to convert my B3 FT car to a carbon fiber chassis. I ordered a NIX B2/B3 chassis from Fibre-Lyte and some parts from Shapeways. It took me just a short time today to swap everything over to the new chassis. I had to drill the chassis to secure t...

broodenburg wrote: ↑Tue Feb 05, 2019 3:54 am Thanks!
And what lenght chassis dit you choose?

I opted for the +6mm chassis I think this length was a minimum if you wanted to run the saddle packs if I'm not mistaken.

I know it’s been a while but do we have any updates on his T3 build?

A brief pop-up shower this afternoon left the track a little wetter than I'd expected. However, traction was exceptional and a good time was had by all. Even managed to carry the front wheels through certain sections - and that never happens. Seems the secret to hooking-up on this reddish stuff the ...

Some news... Time to change fake rear damper by the good ones and all of them by alloy ones ;) https://media.joomeo.com/large/5a1991f7d5a73.jpg Anodising removing of course :roll: https://media.joomeo.com/large/5a2542ef7b77f.jpg https://media.joomeo.com/large/5a254372ee7a4.jpg To be continued ... Je...

Thank you Todd for your response in both of the threads i started.... I will try the kingpin retention set on my B3 im sure it will work just asking what others have done in this situation As for the T3... I have gone up in spring rates and am running red rear springs with 40wt oil ....still wheelie...

This is our new chassis set for the Fox and Nova Fox. It took us a while to come up with this design. We use a similar interlocking setup as our Hotshot. We have two sets of servo mount holes, you can leave it offset or center it up. We designed it to reuse the driver figure because, well, its kind ...

^ Thanks! I just missed out on a cool set of black vintage HPI wheels on ebay, but I will dig through my stash and see what I can find.

I added some shocks so its officially a slider I guess. I have a RPM rear guard that I think I am going to gringo up a little before I install it.

RC porn....

Sorry I just had to