RC10Talk - The Net's Largest Vintage R/C Community

Well I think I am done with the rough shape of the chassis although I do need to do the upper brace. I finished them in both styles, Junior and Pro :) Printing will be a bit tedious with them as they do tend to be large, it is probably best strength to print them laying on their side but easier to p...

https://www.ebay.com/itm/325208281644?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1IezaLYnTCC&sssrc=2349624&ssuid=rUKMRphWSMG&var=&widget_ver=artemis&media=COPY My LHS has one of these in stock..hard to tell from the pic but is this a long shaft? Looks like I’m go...

Here is a comparison of the Jrx2 mini springs(black) vs the mini T 2.0 springs(silver).. Jrx2 mini are 25mm & 35mm vs mini T 2.0 30mm & 40mm.

Those look great. I picked up some 6/32 to use but they still didn’t look quite right. The 4/40 are perfect 8) Now you need to find some 2mm for the shocks I don't have any on hand but wouldn't M2 (shocks) and M4 (axles) white nylon nuts be correct and keep everything metric? Before I order 200 of ...

While working on sizing and carefully placing holes in the chassis file I just did this up quickly.. It is going to be a pain to print.. if anyone does post a picture lol This one is likely going to need to be printed on it's side if you want any chance of it not breaking the first time you hit some...

While working on sizing and carefully placing holes in the chassis file I just did this up quickly.. It is going to be a pain to print.. if anyone does post a picture lol This one is likely going to need to be printed on it's side if you want any chance of it not breaking the first time you hit som...

Looks good on draft print quality.

Another pic.

Hot off the printer, heavily modified Kingroon with all the fixins

I usually dont cheat with a raft but I knew I was gonna be away for most of its print and didn’t want one to cause them all to fail

Got it, reading up on the ender 3 now. Thanks. I get it's a hobby and I can grow but I also know me. I am not passionate about it say like RC. So if I don't get going and learn the basics hands on I will not grow, I will get frustrated. I need it to work and then I learn and go down the wormhole.

If you are near a Microcenter, I want to say Joey got his Enders for like $110! I’m sure it was a special deal but it’s so cheap for that printer

Changed orientation. Much less flex/much stronger.

Ok parts absolutely nobody ask for or wants because I don't want to buy bearings for the mockup car! :D I guess they are good if someone wants to build a shelfer and make it look right. :) Flexy Turners: https://cults3d.com/en/3d-model/game/losi-mini-jrx2-vintage-style-servo-saver-bellcranks-without...

Woohoo! I just received a zero-dollar invoice from Horizon with a tracking number for my hat.

Check your emails, gentlemen.

Sacrilege!