HEY GUYS sorry for repeating this but I hit the send befor I was ready and found a couple of mistakes . YUP even your OLD Rustbucket screw up .
Hello. OK IF nothing works after you do what has been sudjusted I have a feeling what may be going on. Since I cant see what tranny you but from what I am looking at over all from the rest of it. FOR it looks like the old RC 10 Gold pan.
I would sudjust removing the tranny that is if it is large 6 gear tranny? FOR that is what came stock in those. All of us knows about that tranny . What the weak spot in the tranny was the small plactic Ideler gears . That are in side, Othe then that those were good tranny. YOU may fine a couple of teeth mising from or broken off of the gears. Then you have to try fine or if you still can order a set from Assocated.
IF that cant be done you may want to concider steping up the newer stelth tranny in witch you can up date to the newer RC T 4 tranny. but you have to use the reg RC 10 Stelth Tranny eather from the buggie or truck in witch you can all most buy or can buy all of the parts to build it . Including a new case. But if your pan is not drill for the tranny you will have drill new holes so you can mouth the stelth. It is differnt then then one you may have but much better. IF you do that I can tell you what you will need to up date the tranny so you can use the newer spure and pinions . I have done this to all of mind and now I have no more problems. It is nice to walk into a hobbie shop up and ask for a T -4 buggie spure and just install it.
BUT befor you do any of that use the sudjustions that has been given to you befor you go to all of that changing I do go a long on what all has been sudjusted to ya . GOOD LUCK DON