rcracr20 wrote:This car looks sweet! What brand and part number are those front tires? They look reallllly familiar, but can't seem to remember what they are.
parts are listed in first post. i have been keeping it updated with the new parts. anyway here is your answer "Panther Lynx Soft Front Tires T700S"
m_vice wrote: Nice work on the paint, very original Cow schema.
thanks. as i said i wanted her to show the cow heritage yet stick with my normal pink/orange color combo. going through the few masks i had left i found the flames. so that's what made me choose to use them. i think they help give it an old but new look. i will most likely break out a paint brush and paint the netting on the windows later on. my hands shake less when i'm not tired
to the best of my knowledge they were only offered in yellow. ether way the yellow is there to stay. this is because this build is based on the buggy i ran bitd. sure there are differences but some of the main points are there. pink powder coated chassis (drilled and cut), yellow a&l steering, rpm worlds arm conversion, losi disc wheels... all parts back then were dyed pink. i opted to not dye the parts because of what dyed parts look like after they are wore. i have also added items that i wanted back then but could not afford.
but all in all i agree.. bubble gum pink + neon yellow = eww..
This is a nice new built pink team car i picked up from a member here along with my original new built worlds car. Going to add some titanium turnbuckles and a few other hopups and change out the gold motor plate to a black one.
Last post
I also have a scoopless turbo mirage body for this as well.
Well I can't wait anymore for the bits for this to get here so I am going to list the pictures I have and thank the members of RC10talk who have contributed so far....
From Tulsa I bought some long RPM rear arms
Tom Stacey has provided a used...
Last post
Unfortunately I have to many projects so this must got to make room for another.
well i have a novak racer ex hyper fet esc and a trinity monster horsepower pink label motor that i have in my rc10t runner with a novak 2 cell smart stop and i need to know a good starting(safe) gearing setup. the spur is an 87 but im unsure as to...
Picked up this RC10 on Ebay recently. I had an RPM RC10 a while back and I sold it like a fool. This one is better though because it has the wiley and elusive RPM 2.65 trans. So, I think a decked out RPM runner is in order. Might even put the tall...
Last post
thats the same thing i wondered.........i'm curious to see what it looks like
This project started when I received a darn nice graphite chassis except for the fact that the front of the chassis had been cut on the ends of the nose. So much that only half of the outer holes for the a-arm mounts were there :evil: So i dug into...
Last post
Very nice, ballsy to run those arms though-
I do have a set of the dynotech arms, I may change them. The arms are actually not as nice as they appear in the pictures. Someone took a dremel to the shock area for clearance :evil:
I get a ton of questions about my cars, both in person and online through this and other forums. It got me thinking that the best way to answer the questions would be to do a complete build and post it, along with pictures so anyone could see...
Last post
My builds all use standard AE, JC or RPM type ballcups. I don't think a 1/10 buggy needs anything more.
I blew the dust off of one on my projects (actually, they don't really collect much dust, I open them up to review them and what parts I need to get the kit to 100%, or change things around)
I have about 15 different 'kits' of buggies on my to do...