Just started this project. Hyperdrive chassis and mid-motor conversion kit for the 6-gear trans and rear buggy suspension. Transmission kit comes with modified plastic gear box halves, extended motor plate, gear covers for mid or standard mounting options and a hyperdrive belt kit.
Not much but the new case halves allow you to swap the output shaft to the other side of the housing. And the extended motor plate also allows mid or rear mounting options. With either option you want to keep the motor plate on the left side of the car.
Updated pics. Pretty much complete at this point. I have an andy's rear oval mount but it needs to be trimmed to fit the hyperdrive motor plate. Also need to get some links put together for the front.
i've always hated the wheel track difference front to back on those gearbox conversion pan car chassis kits. the agi-jammer is the same way.
I don't know it looks like that may be at 235mm, as the rims are run reversed offset. Looks super clean. On other conversions it seems as though like you stated the wheels are sticking out an extra inch.
i have a jrx2 agi-jammer. the front is at 8 3/8", but i can't narrow the rear up any more than 9 1/4"....... without making shorter arms. and that's with using CW rims, not pancar rears with the adapters. that'd be even worse. the only body that i've found that could possibly work on it is the mcallister 300zx.
i have a jrx2 agi-jammer. the front is at 8 3/8", but i can't narrow the rear up any more than 9 1/4"....... without making shorter arms. and that's with using CW rims, not pancar rears with the adapters. that'd be even worse. the only body that i've found that could possibly work on it is the mcallister 300zx.
Yeah I am eating my words now, although I would like to know what it measures out at. I wonder if RC10DS rear arms work to narrow the rear end any?
I've had this project in my head for quite a long time, and finally found the missing front axle parts that I needed to proceed. I had jwscab machine the diff halves in order to fit the JCAR DDS tranny. I also have some red aluminum Ultima front...
Last post
That's going to be a great project, looking forward to the progress!
Kyosho Ultima Hyperdrive 1.jpeg Kyosho Ultima Hyperdrive 2.jpeg Kyosho Ultima Hyperdrive 3.jpeg
Last post
thanks: I added these about 6 months ago to my ebay wishlist. I expect this to be too large though and with the new import regulations to europe trial and error has become an expensive method
Hello All, trying to put together a six gear RC10 for running on smooth surfaces and have some of questions. I was hoping members here could help me out.
Here is what I have/like to use:
Six Gear RC10 w/ short front arms and one hole front/rear...
Last post
A long time ago a guy had a crazy idea and I only saw part of his prototype for the transmission class on the flat carpet oval...
He took the front part of an old 10L style pancar chassis and put it on an RC10 tub. Essentially hacked it up made a...
I just bought this the other day, better pics once it gets here. I do not recall ever seeing this one before, any Ideas what company produced it?
It has a pan-car front end with a jrx rear mounting pattern, even has holes for the 5-link side...
I'm thinking of a conversion kit that I used at one time. I've seen a lot of conversions on here, but I don't remember seeing the one I will attempt to describe. I can't remember the manufacturer or a search would probably yield some results. It was...
Last post
I searched AGI Jammer in google and only one sight came up with relevant r/c info on the first page. You guessed it...RC10talk. Pretty cool, huh? 8) Good stuff
Hello I just wantd to ask if anyone had this kit or have pics of it built. I don't plan on building it yet. Just wanted to know if anyone has seen it before? If so how was the performance and looks? Thanks in advance...
Last post
oh I still have it. My for sale still exists as does the vintage article.
pics and link to the article ...