Iam restoring my vintage RC10 Graphite and have just ordered an EZRUN 3000kv brushless and ESC Combo, its only going to be used for a bit of fun and i am only looking at using some 3800mah NIMH rather than LIPO's.
I have a load of spare spurs and pinions and after a recommendation to run with this set up?
hello!
maybe you read my other topic on Readers RC10's .
i'm currently working on two RC10 projects.
one with 6 gear and the other with stealth tranny.
both will get a 17Turn Motor which i already have (Reedy and LRP).
the trouble is .. i need spur...
Last post
Kimbrough, Robinson and PRS all make really good gears. I don't know of any bad ones out there, really.
Hello all. New guy here getting back into the hobby.
I will keep the back story short: The XX-CR I built out of the box when it was released in the late 90s. Still a runner; busted a few parts during a recent run and caught the bug when seeking out...
Last post
That would depend on what you are doing with it and track conditions etc. I think most of us use the dual slipper for our runners, I have never run a hydra but they do serve their purpose but I think are abit more maintenance.
I use a 90T kevlar...
Can someone tell me what is the pinion size supposed to be with the Stealth Tranny? One of my car is overgeard I think... The motor becomes so hot I can barely touch the motor plate and one to the motor pole loose its wire... The tin melts! It's not...
Last post
The Reedy FireHawk is a stock 27 turn motor, gearing it 21/81, with a stealth trans (2.25 final drive ratio) gives you a 8.78 final run out...on a buggy that isnt bad. I shoot for 10~10.1 when racing stock in my RB5 or B4. If your just bashing...
So I was wondering if any of y'all got the same issue(s)? Have an 87T spur and a 20T pinion on a Lethal Weapon trans/Power Clutch. The motor bottoms out against the tranny case and the gears barely mesh. So, duh, larger spur or pinion, right? Well I...
Last post
Hi Mark
We always ran 48 pitch 90 to 96 tooth spurs stock and mod with 26 to 40 tooth pinions. I liked the tooth angles better on the larger gears. I mostly ran Kimbrough spurs and Robinson racing spurs.
Firstly I would like to suggest that it is advisable for you to support your local hobby shop. There's no replacement for being able to go down to the lhs and discuss some difficulty you are having with your newly bought equipment. If you don't...
I just recently won a rolling RTR B4 for $51.oo USD off of ebay, :mrgreen: and I have been thinking about putting a brushless combo system in it. I don't think I will be racing it, although I have been asked by the local RC community if I wanted to....
Last post
I loved brushed motors. Brushless just doesn't have the character of nice modified wind.
or the smell... :wink:
i got a bunch of novak brushless stuff (the old ss5800, couple gtbs with a 17.5 and 6.5) and one speed passion gtb with the 17.5 spec...
As the subject says I'm looking for insight into when and on which buggy model Kyosho first used 48p gears and which model was the last to use 0.8 mod?
My own research by looking through manuals would indicate it was on the Triumph with the TM-7...
Last post
Yes, the w-0110 can be used on the entire series- from Ultima to the Outlaw Ultima to the Optima, Turbo Optima, Javelin, Salute, and into the Outrage and 2wd scale car series. Anything with that came with a UM-1 or OT-27 (sprockets and gears for...