Hi all,
First post, I will try to keep it brief! I've been into RC for about 30 years. I recently went to clean out the garage and found all my stuff...I knew it was there, just wasn't doing anything with it. I have an RC10T3 runner for me, an RC10T runner for my wife, an HPI MT18SS nitro runner, A Clod Buster Clodzilla IV for chasing cats and crushing things, and a few helicopters. Those are the ones I play with. But I found all my other stuff and so I started fixing them up thinking of selling them and making some room. I started with my Tamiya stuff, I got it all lookin good and am selling them...they were fun to build and all, but not that much fun to drive. Then I came across some older chassis and thought perhaps I should see if I can build one or two. My main goal was just to make room in the garage...I don't want to spend very much cash...so I am starting with the car pictured below. As I started, I found that these are much harder to let go than the Tamiyas. I only build to drive, and I NEED to make room....my wife drives RC and flies the choppers, but if she says clean, I must clean, I already have one room filled with guitars and watches! I would love to hear your opinions on what I should do with this truck. I am only using parts I have or parts I can clean. The rust is driving me crazy and the white plastic has been stained and yellowing...I have them soaking in peroxide and sitting in the sun...cleaning the shocks, stripping them, basically going to rebuild it from scratch....I want to dye the white plastic...thoughts...and Thanks to everyone who posts all the quality info I have used so far...
T.
T Diddy wrote: I would love to hear your opinions on what I should do with this truck.
keep it and sell the guitars
Welcome to the board. you'll find getting rid of these after toiling over the rebuilding and cleaning is hard. What color you thinkin of dying the parts? personally I think white really sets that green off but I have seen black also and looks good. Either way its gonna rock. I think my favorite powdercoated chassis are the green ones like yours. Keep us posted on how it turns out.
Todd
Peace and professionlism.....Kabunga signing off!!!
Thanks Todd,
It is kind of a drag, but I have no choice...I can't sell the axes! But I am in absolutely NO hurry to part with these. I'm having a blast and so is my wife...we watch you tube vids..and read posts....she says" That's YOU"!!! The one that cracked her up was the..." I know I have that part somewhere"...and then me spending hours re-arranging everything in the house to find it...But I will find it...I was thinking of dying the white a very very dark purple/black...it would look mostly black...with the green, I have both gold shocks and gun-metal green shocks...I want to keep it original for the most part no matter what. If you have, or anyone else, a good rust remover...or any suggestions, I would love to hear them. I really want to make this nice, with stuff I have, and have a lot of fun doing so...I have the most fun building them and painting....it might have something to do with the fact that I can't drive for beans...which I don't know why I would want to drive for beans, cuz I really don't even like beans...but fast is good...obnoxiously fast is much better
Thanks for the rust removal link...I think I will look into the kits. Everything is straight, just a bit rusty. I'm thinking I will build it with the white plastic, see how it looks and then decide whether or not to dye the parts...can't go back, so I had better make sure. I should have it close sometime this week and I'll throw up some pics and see what people think..
Thanks again for the link,
T.
Hi All,
Well...I got some great info on the rust removal. PB Blaster is the King! I wasn't going to rebuild the trans, but it was coming along nice and I was having fun. So I just ripped through the whole thing...why not? So it is still far from done. I had to order some diff lube and a few other misc. parts. But I did well. Only parts I had on hand so far. I did break down and get some wheels and tires. Couldn't pass up the deal. I had originals, but the tires were shot and the wheels were already dyed. I have a couple of placeholder screws, blue aluminum, until I either find them in a box somewhere, or I break down and order them. But other than that, new shock oil, ect. it has been stuff I had, knew I had, took up space, but never put it all together. I think it made a difference. Let me know what you think and any ideas on a body and where to get it. Got some great advice here and I appreciate it. Excellent resource. I have the original body, but it is hashed. I have the new old stock wheels and tires coming, white, but I almost kind of like the neon yellow...looks good with the green, kind of like a fast mountain dew can or something...so my paint schemes are going wild in my mind....any help or thoughts there are also greatly appreciated. Thanks for all the help and I will keep you all posted.
T.
Thanks Todd,
It has been a very crazy adventure. It was very hard to not spend money...just wanted to see if I could do it with what I had on hand. Any body ideas?
Oh and maybe I can actually give some advice...I researched the " peroxide" method of whitening...my advice...if you live where there is sun, just clean with soap and water,...soak for a few days...scrub and clean as best you can, then throw in a glass bowl full of peroxide and set in the back yard in the sun for about 4 or 5 days....no light bulbs needed. same principle, just takes longer and is cheaper and less irritating. So I hope I helped someone.
T.
T Diddy wrote:Thanks Todd,
It has been a very crazy adventure. It was very hard to not spend money...just wanted to see if I could do it with what I had on hand. Any body ideas?
sounds like mrlexan will be repopping the rc10t body shortly. Might wanna drop him a line or check in his sale area for more info...
Todd
Peace and professionlism.....Kabunga signing off!!!
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.
OK..this is crazy...I think it was Todd who said it first...but the more I clean, the more I build, the more I want to make it....not perfect....make it mine...the more I put into it....the less I want to sell it! ...and all I wanted to do was get it good and sell it. I'm gonna peeve my wife off...still might want to sell it, but it is going to have to sell for...well...like a sweet porsche...I am in trouble! I found some issues with the tranny....so parts have been ordered. I had no choice but to get new e clips and other things to make it look stock but new. I cleaned up all the screws, e clips, ect. the best I could...but since they are available and the truck is lookin' sweet I figured why not. And for body....well there I have some troubles. I still have the original, but it is a little messed. I think I would love to put a new lean, low body on it. I have seen some of the T4 bodies and like them....I would like to make it like a "A Bad Ass Sheep in Wolf's Clothing " kind of thing. So I am so up for body ideas.
I'm trying to get an RC10T4 running from a bunch of parts I got in a garage sale. Before I spend a bunch of money on a brushless setup, gears, diff upgrade, CVDs etc. I just want to get it running. Unfortunately while trying to setup the...
Last post
AS JPEA said checked Associated website,
this will handle any brushed motor that should be good in that truck.
15t is the max this one can take
or check ebay, you can find a brushless set up from speed passion motor and ESC
So gave my B4 an overhaul/update with some new parts during the Covid crisis, enjoyed rebuilding this car, such an epic car that I raced the hell out of!
So the spec is:
Brass polished hinge pin holder
SS screw kit, every screw has been polished...
Last post
I run my runner B4.1 more than any of my r/c's - it handles great and is mega durable
I snapped a few pics of my nearly complete 10T restore and felt like sharing. Well, not so much a restore than a rebuild of what it use to be. Here she is:
RPM Bumper
RPM front body mounts
RPM front A arms
RPM rear A arms
RPM rear hub carriers
RPM...
Last post
I want to say it's a Lycra or Spandex type of cloth. Very thin, smooth and stretchy. My wife sews also and she is going to see if she can pick up some of the same stuff and make a few sets for my other trucks. My T3 and other T2 are in need of them,...
this showed up in the mail today. real nice condition. only problem is the holes for the servo and msc were modified a little. other than that, the chassis is real nice. i think i'll get it running, and take it to the local off road track, and have...
Last post
well, all i have to get for this now is a body. i stripped the chassis, feathered out all of the scratches, and gave it a fresh coat of paint. cleaned all the parts, and put it back together. i put my losi hydra drive setup in it, because i needed...
I've been working on my humble rebuild for a few weeks now. I'm the original owner of the truck, I bought it when I was 13 and have kept it ever since. The last time it ran was sometime around 20 years ago. Now that I have kids I wanted to get it...
Hi all. This is my original RC10T that I saved up for, and bought new when I was 12 years old. It was my first real RC vehicle. It is in relatively good shape, and has not been run since probably 1996. As a kid I...
Last post
That servo mount method is brilliant! Thanks for sharing that pic/thread!
I always wanted an Rc10t when i was a kid but they werent too common in the UK as far as im aware. I bought this one from j-sou a few years back. Unfortunately it was packed away into storage when i moved house and this is the first of me sorting...
Hey everybody! Wanted to show off my rebuild. I ended up taking this whole thing apart. I bought this car in a lot of multiple others. It has the stealth transmission on it. I was able to get most of the white acrylic paint off the body and pan. I...