rc10t2 diff, side to side play??

[sbcnyc]

so i got a bunch of stuff for a build, not quite all there yet, but i figured doing the trans/diff will keep me psyched on keeping with the parts hunting

so....diff is silk, got everything plopped into the t2 case, spaced the top shaft right, check for end play and i was happy,...... until i checked the diff for the same, theres maybe a mm of side to side play, the outdrives slide across the bearing races

my question is, are there shims of some kind to sure up the diff against the case bearings? i cant remember ever needing to do so with an associated... or is this normal?

[DHood]

You could probably use TC3/4 diff shims if needed.