I did have a search on here about this but didn't find an answer.
Could someone give me the measurements of the front and rear rc10T shocks from eyelet to eyelet please ?
The 1.02 and 1.32 ones.
Hi all, looking from part numbers, brands or suppliers/companies that have aftermarket shocks and tyres for my RC10T as I'd like to dust it off and start racing it again in my local track in short course truck event. Thanks for any advice.
Last post
Ok cool mate, I'm happy to rebuild shocks but was curious as to what people are running these days. Thanks again I'll have a look around.
Biggest upgrade is to grab the shocks off of the newer SC AE trucks....................................
New to the site. Restoring three three RC10T's to original and one to play with. Can anyone tell me will RC10GT shocks fit the RC10T? Also, what aftermarket or current bodies are easily modified to fit the RC10T?
Any advice as to what parts swap...
Last post
The b4/t4 caster blocks, steering blocks, king pin and front axel will fit the rc10, rc10t, rc10gt if you drill out the hole to fit the older hinge pin they are much stronger than the original and easy to find if you break. you have to swich all 4...
here are my latest 2 rc cars, any info is super appreciated on them .
bought it from a sponsored driver. is it the real deal? what motor plate would look correct?
another truck missing the tranny
input, info, opinions as to what they are,...
Last post
Bid got it for 66.00 plus shipn no protector film has some marks from sitn on things but barely see it in the light.Put all rpm green fasteners on it and shock spring holders,need the adjustment clamps in green to match up.DON
Recently picked this 10T up… Am I correct in thinking that this is one of the last runs of the original 10T design? Chassis is a C stamp and has all black parts as you can see.
Last post
That high of ratio ehh? I was thinking around 21-22t. It’s. Reedy radon 15t motor
The original 10T has a 2.25:1 transmission ratio, while newer trucks have 2.4 or 2.6 ratios. So you can't directly compare the pinion size to that of newer trucks....
I received this truck many years ago in a parts lot that included a very dirty but very complete RC10 Graphite.
Anyway, I'd like to rebuild this T? close to original and make a nice runner but I'm a bit confused. It appears to have T2 arms but a...
Last post
The front tires are original 10T #7870's and they have a heavy spot. I've spun them on the wheel 180 degrees and results are the same so it's the tire. Was it common bitd to balance them?
Not sure how common it was but a friend of mine balanced a...