haha...ya i do love the integrated clip...the velcro works though...Yes its a runner, i built it for the vonats...I mean you should know i think i bought half the parts for it from your site..haha
That's a very nice looking specimen! How does it drive? If you need ideas for a gear cover, I think a Jrx Pro SE cover from TBG would fit no problem. Just a thought if you hadn't thought of it yet. Also, what weight oil you are using in the shocks?
I have to figure out what the spur is i forget...it's a modern A.E spur....the wheels are b4 wheels with customs works spacers in the rear withe lower arms spaced in a bit for clearance
Regarding the gearing - on a 17.5 motor you'll be looking for the running the largest pinion that will fit whilst using the smallest available spur gear! Generally if you think of what gearing you would have run on the equivilent brushed motor then go up about four pinion teeth
Nice car. I noticed you have the very rare front arms without the dimples. Those only came with the "Limited Introduction Series" kits. I consider those kits the early Endinger version of the JRx2. Is that a textured chassis on your car to go with those rare front arms?
Yea the chasis has a bit of texture on it....also had the old orange wheels but of course they were broken....there is a thread somewhere on here showing when i got the car...I did not know about the front arms being brittle...i will have to see if i can find a set to use for the vonats
Got my NIP Tekin ESC and receiver installed in my RC10 and it's ready to roll.
Finished the decals,too.
Just a few small items left and it'll be all good. :D
Last post
cool rubber what tires are they on the front?
Vintage Pro-line V-Groove front tires, PN: 019F or 1022.
guys lemme tell ya, being on a racing photoshoot for an entire week in miami is both a blessing and a curse... it was reallly really hot and my feet still hurt from standing on the track all darn day. now i have the unfortunate task of editing the...
Been messing with the gold pan the last couple of days, took out the crappy traxxas ESC I had in there, reprogramed and installed a axial (castle sidewinder) ESC in there instead, running into a Trinity Cobalt Pro 27t stock brushed motor. I got a...
Last post
Although all I have is bald tires (no JC wheels yet) I'm gonn a take the 'ol car to the track tonight for a little test n tune n fun! I race Short Course Mod tonight, I'm sure the old RC10 will draw some attention when I put it on the track for a...
Man, I just got a Traxxas Slash in today.....you think it was a 8th scale or something...the thing is huge!
Last post
The Slash will be more user friendly and durable than a Mini T. My son has taken his full speed into a brick wall more than once already. Scratched up the body a bit. I am tempted to put the speedo into Trainer mode for him, but I know he will be...
Just bought this heap off eBay cool part is it still has the original sales receipt from 1982. Any reason the tires would be covered in silicone?? Better traction?
So I have this B2 I picked up as a roller, and just happened to try and stick a steering servo in the car. I think it was an S128 or S148 futuba servo, standard size. It wouldn't quite fit in the small space for a servo. I checked the manual but...
Last post
Good to hear you got it worked out.
Since it does fit in so tight,
it will be the last thing to fall out when doing cartwheels !!!!!
I stumbled across a good find on craigslist. I picked up an unused /partially build T2 for $65. Diamond in the rough meaning most of the part bags are open and scattered in the box and it looks like the thing sat in a garage for 10 years. It is all...
Last post
It's so new and black all I can see is a silhouette with yellow wheels :lol: