thanks for accepting me in the forum. I write from Milano, Italy. I would liked to ask your help:
I bought the RC10 classic re-release. Can you please suggest me the list of components ( Motor, esc, servo, batteries) that you think that will fit my needs considering:
1- I want to spend an average price
2- I used to run onroad 1:10 more than 10 years ago, so consider me a newbye
3 - I will run the car in a proper offroad race circuit near my city
by chance do you know also where I can buy as well a painted body for the model?
One of the rear shocks on my late model (all black) RC10 Worlds car will not stop leaking between the cap and body. I have replaced the O-ring three times, but doing that has not helped. No damage...
Last post
Try some teflon tape (for plumbing) on the threads. It has worked for me in the past. Like many, I don't bother filling shelfers. As an aside, I have used a stock motor shim (they're teflon, and for brushed motors) in the o ring stack while...
My father bought my brother and I these about 20 years ago when they first came out, we spent alot of time building our trucks and learned alot. I used it casually on and off for 7 years or so probably. I have since decided to pull it out of the...
Last post
The nice thing about the 10T is that the 10T2 and the GT shared the same geometry arms and the GT was in production until just a few years ago. The parts were a little different structurally but everything else is the same. If you broke almost...
Hi there,
Just bought an old RC10 Worlds Car which has been modified and goes like stink. Unfortunately
the turning part of the car is very poor on tarmac with major understeer. I thought I'd
put some wider front wheels and tyres on the car. I like...
Last post
hey, welcome to site. off the top of my head, i can't think of any wider wheel/tire combo that's readily available. i would try putting 30 degree castor blocks up front, and 0 degree rear a-arm mounts and hub carriers on the back. that should help...
I am converting my ultima, outrage, and raider to use 2.2 wheels and I need tire suggestions.
We drive on an outdoor track at the park that is very hard packed dry dirt with a slight amount of sand, that gets a light dusting of dirt/sand on top....
Last post
My favorite track is an outdoor hard packed dusty track :) At night, it holds the moisture and becomes a traction monster, but during daylight, she's a slippery beast (waiting for THUMBS to read that...).
Hi All,
Just wanted to know if yu guys have any gearing suggestions on the YZ-10 if using a 17.5, 10.5 & 5.5 Brushless motors. Also what is the gear ratio of the Yoke is is 2.25?
Thx,
John
Last post
The early YZ10 was 2.33. Mine came with the 35 tooth diff and 15 tooth center pulley. Not too sure what the 91/93 works cars came with.
I have a rc10t2 that I dug out and would like to fix up to be new again! I would like to paint the frame blue and im wanting to either to buy the rpm products that are blue or dye the ones I have. (im having a hard time finding them) My...
Last post
Thank you for your reply! I plan on running the car so I will look into the powercoat and get that done!
I honestly don't know what to do with this, it's C stamped drilled for 6 gear but not counter sunk, drilled and counter sunk for stealth. As you can see it's light gold and as we know finding a matching nose plate and motor mount for it is pretty...
Last post
b. anodize/ powder coat that thing along with a nose plate and motor mount. build yourself a beauty.
imho the fugly of it is whats makes it unique... i wouldnt in a million years take a nip chassis and anodize/powdercoat it when they are a zillion...