The chassis and running gear are in really great condition. The body, not in good condition but I thought it would be fine for a runner. Unfortunately the body was broken at the rear and would not reach the mount on the rear shock tower.
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_55185CEA-17B2-46FE-82B9-82FD79BE85E4_zpsagxc2nqg.jpg)
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/B732A988-8973-4AA2-A808-BBEEC39A0B1E_zpsphellu5s.jpg)
Rather than buy a different body or use this one and having it flop around I decided to extend the shock mount forward with a 3d printed part.
So I drew this up in solidworks:
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_7AAF75D9-371D-4161-B73D-438DC540D7E4_zpssdgazupf.jpg)
Then to the lulzbot, here it is in Cura getting ready to print:
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_7DD36D64-1568-4E41-A4F6-62529A344DC4_zpspgg1ouh3.jpg)
Now this:
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_4731359D-FA79-4DA4-93F6-D5F23BB60B1F_zpsbxs9kpe1.jpg)
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/44132BA4-580A-4993-932A-E692D5710B3D_zpshloihjct.jpg)
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_44132BA4-580A-4993-932A-E692D5710B3D_zpshloihjct.jpg)
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_B1E1BF68-BB2B-46C8-B839-74A6CE150582_zpsonybv7pn.jpg)
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/2D917E4D-2F84-4E1B-B679-2F65FB7C8CE7_zps5vpivqbn.jpg)
I also put a Jconcepts protector on the bottom to save the chassis from more wear,,..
![Image](http://i725.photobucket.com/albums/ww260/bigswampnella/Mobile%20Uploads/2015-03/th_503C0B24-F45F-4EF9-9C00-A1DC7B58E008_zpsfajxekpq.jpg)