Here is my B3 factory team runner. Waiting on my v2 first version shocks to get here so I can do a quick rebuild on this and I have a couple new b2 bodies as well.
I figured I would combine this build thread for the two B3's I'm building. I've been on a big B3 kick lately. I have been hunting donor cars and parts for nearly a year.
FT - This is going to be a shelfer fitted with a lot of vintage upgrades and...
Last post
Hey Lavigna - I know this is an old thread but I have questions!
What did you use for these items:
Rear Shock Tower
Battery Hold Down
Ball Ends / Turnbuckles
Did you use the MST ball nuts on front AND rear inside link spots?
Put this together out of one of the dirt oval cars I had that I stopped running. car was really clean to start with, added some atlas parts and a set of B3 shocks with gold shafts, some B/B steering that bearickster hooked me up with, and made a...
Last post
Looks very nice for a runner.
How close are the rear wheels to the shocks?
It does not look like there is much room.
Looking for any help sourcing factory team shocks for a T4 team truck build. Can be either the old 1.02 front and 1.39 rear shocks or the most recent 12x27.5mm and 12x36mm shocks. Is there anywhere FT shock kits can be bought? Or is the only way to...
Last post
...12x27.5mm and 12x36mm shocks. ...
And what the heck is up with AE discontinuing big bore shock kits, which they still sell with many of their kits?
at least one of the sets exist
the kashima coat bodies are pretty cheap online so a set can...
Well i have to say i have wanted this car since vintagemishal started this resto. i was lucky enough to buy this car after we made a deal and payment plan :) i took all the important info from his post with some pics so this car will never be...
Last post
Very cool, read both threads !
I wonder if they both had the MIP battery pads ? I've got a black one like that still in my trx.
I figured I would start a build thread on my 4-10 Legend 4wd RC10. Any questions or comments are welcomed. I have not done a build thread on here, so here goes nothing. This will not be a 100% correct restoration due to parts being very difficult to...
Got this a while ago been kinda working on it little by little. Has a brand new chassis plate and some other new stuff! Just need to get a few little things and a body then it will be ready to run.
Here are some pics of my sons new b4 factory team that he races at our local track. It has a spektrum servo, sphere comp. speedo and Tekin 13.5 motor and he runs venom lipo packs. He also uses Gold barcodes front and rear.
Last post
I was lucky enough to get one of the last ones from Tower as well. Santa(wife) got it just before they were gone.
If these last as long as the original Rc-10, I don't think I will need to replace it for about 20 years.
Amazon [Bot], 
radioactivity,