Here she is almost done. Original tires but on yellow wheels. I put 3/16 cvds, an old orion modified motor, and an original 10t body I had around that's in decent shape. I'm gonna put some new prolines on the yellow wheels and mount the originals on white ones. I also have a 410 m1c I'll put in eventually. This one will end up as a light runner. Kinda wanna do a new body, too, but this one will work for the time being.
i need a controler and wanted to know whats a good one to go with that will work? newer the better
thanks
Last post
fibrelyte makes a carbon fiber tub you can use on a 10t, and team composite craft I believe is re-making a truck chassis but might be really tough to get a hold of.
otherwise, keep an eye out for a truck on ebay with a carbon fiber chassis, vendors...
Hello I have a couple ?'s about a RC10t team truck model #7035
1 does this kit come with both wide and narrow front tires ?
2 does it come with 3 piece wheels ?
3 does it have the narrow body ?
have a chance to buy a nib in box kit at a fair price...
Last post
The rears are pretty close to the same, but I believe the fronts were about wide, maybe 3/8 on each side.
I've wanted to build this truck for some time, and needed a good example for the History of the RC10T thread, with two kits on hand...... one needs to be built 8)
Just to get the build thread started.
more to come..
Last post
Did it have a set of narrow fronts included? If not, when did that stop?
No narrow tires in this kit, that ended in 1991-92 ish with the #7001
As the title says, I'm looking for the RC10T kit #7035 manual. PDF copy is good. Please let me know if you have one available or know where to find it. I've had no luck with google.
Cheers
Last post
here is the parts list..
and the manual...
sorry, I dont have any of the 20 or so supplement papers that went along with the manual. As mentioned above, things changed almost by the month
Thanks for posting this! I have been looking all...
This was part of my most recent purchase. It was very dirty but after a quick cleaning it looks pretty decent. Would have hated to see this lead a bashed life in such good condition.I really don't like the 3pc wheels but its all I had to stick on...
Last post
Hey Todd,
That last GT cleaned up very well. i like what you did so far.
I like the past pic of your GT with the original color grey turbo pipe.
Its happened to me so many times now I don't even think about it, changing out wheels and the pin slips out of the axle and magically disappears. No matter how many extra pins I have in the spare parts, they're never the right size. Grab a nail,...
Last post
I've always used a piece snipped off from a coat hanger.
Various bits for my projects,
Really didn't like the battery set up for LiPo cells on the Optima, and Rocky, so bought these clamps to try, much more secure and well made.
Also a slightly different bell crank for my belt drive rocky conversion,...