New project -- The "BC3"
- MarkyDents
- Approved Member
- Posts: 911
- Joined: Sun Jan 10, 2021 4:52 pm
- Location: Staten Island, N.Y.
- Has thanked: 1113 times
- Been thanked: 408 times
Re: New project -- The "BC3"
Extremely interesting idea, nice execution.
Who do you race for ?
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out
Me……. I race for me.
That’s impossible, I was told you need a sponsor to race.
Hey Cru ! Go balls out

- Russ Winn
- Approved Member
- Posts: 432
- Joined: Sat Nov 20, 2010 2:52 pm
- Location: Hillbilly Hell, Fl.
- Has thanked: 34 times
- Been thanked: 39 times
Re: New project -- The "BC3"
Very interesting idea. I've wanted to build a 2wd using a TC setup, but I don't have the heart to tear mine down for it.
- scr8p
- Administrator
- Posts: 16402
- Joined: Wed Feb 08, 2006 2:46 am
- Location: Northampton, PA
- Has thanked: 26 times
- Been thanked: 837 times
Re: New project -- The "BC3"
After my stress test led to poor results on my BC3 chassis, I decided some kind of top brace was necessary. I installed a few stand offs down the spine and made a paper template. I then sent the chassis off to Jeff to have one cut out of carbon. After the initial g10 test brace, I decided to tie it in all the way to the bulkhead instead of just the chassis posts. Jeff also whipped up a battery hold down while it was there. It nice and sturdy now. Some other parts showed up, so I may be able to get this on track this weekend. The build is further along than these pics show, so it may happen.

- scr8p
- Administrator
- Posts: 16402
- Joined: Wed Feb 08, 2006 2:46 am
- Location: Northampton, PA
- Has thanked: 26 times
- Been thanked: 837 times
Re: New project -- The "BC3"
So I got this thing together the other week. I wanted to get it on track before the end of the outdoor season, figuring that track would be a little more forgiving than some of the indoor places I'd be able to get to over the winter. I threw some electronics in it temporarily, so disregard the long wires. I had just installed them on the esc and didn't want to cut them.
During the assembly I found issues with some of the rear geometry that would need to be addressed, but I worked around it just to run the car. About half of them are now fixed, the other 1 or 2 are a little more involved. So I'll probably wait until after the NC vintage race to do anything about those. But overall, the car worked "ok" for just throwing a setup at it. I raced in in sportsman just to get some track time. It was definitely loose, and got worse as the day went on. So just took it easy. I have an old LRP 17.5 in it that's kind of on it's way out, and I had it under geared..... so it was a little on the slower side. But it took the jumps like a champ and held together. So I it was a successful first outing. I took some on track video of it, one of these days I'll get it up on YouTube.

During the assembly I found issues with some of the rear geometry that would need to be addressed, but I worked around it just to run the car. About half of them are now fixed, the other 1 or 2 are a little more involved. So I'll probably wait until after the NC vintage race to do anything about those. But overall, the car worked "ok" for just throwing a setup at it. I raced in in sportsman just to get some track time. It was definitely loose, and got worse as the day went on. So just took it easy. I have an old LRP 17.5 in it that's kind of on it's way out, and I had it under geared..... so it was a little on the slower side. But it took the jumps like a champ and held together. So I it was a successful first outing. I took some on track video of it, one of these days I'll get it up on YouTube.
- Russ Winn
- Approved Member
- Posts: 432
- Joined: Sat Nov 20, 2010 2:52 pm
- Location: Hillbilly Hell, Fl.
- Has thanked: 34 times
- Been thanked: 39 times
-
- Similar Topics
- Replies
- Views
- Last post
-
- 7 Replies
- 1476 Views
-
Last post by Truckguy
-
- 24 Replies
- 4482 Views
-
Last post by sbcnyc
-
- 26 Replies
- 2890 Views
-
Last post by Volumiza
-
- 3 Replies
- 711 Views
-
Last post by Brandon G
-
- 152 Replies
- 15745 Views
-
Last post by DHC6
-
- 17 Replies
- 2887 Views
-
Last post by LosiXXkid
-
- 12 Replies
- 2402 Views
-
Last post by FasterLouder
-
- 30 Replies
- 3549 Views
-
Last post by Steve71
Who is online
Users browsing this forum: ChrisMurphy,
CommonCrawl [Bot] and 0 guests