The left overs.
- Synergy
- Approved Member
- Posts: 1787
- Joined: Sat Dec 23, 2006 5:57 am
- Location: North East England
- Has thanked: 127 times
- Been thanked: 70 times
The left overs.
This is what I have left after yesterdays mad building session. I also have a CE shock tower set and some dog bone drive shafts not pictured. Please help me with some advice, do I have enough stuff to at least put the Tekin together when it arrives
- Attachments
-
- IMG_1119.JPG (247.3 KiB) Viewed 1457 times
- IMG_1119.JPG (247.3 KiB) Viewed 1457 times
-
- oooo itchy or is that scratchy
- IMG_1118.JPG (245.75 KiB) Viewed 1458 times
- oooo itchy or is that scratchy
- IMG_1118.JPG (245.75 KiB) Viewed 1458 times
-
- IMG_1117.JPG (232.52 KiB) Viewed 1459 times
- IMG_1117.JPG (232.52 KiB) Viewed 1459 times
-
- IMG_1115.JPG (210.66 KiB) Viewed 1460 times
- IMG_1115.JPG (210.66 KiB) Viewed 1460 times
-
- IMG_1114.JPG (220.36 KiB) Viewed 1460 times
- IMG_1114.JPG (220.36 KiB) Viewed 1460 times
Experience is that marvelous thing that enables you to recognize a mistake when you make it again.
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
- Synergy
- Approved Member
- Posts: 1787
- Joined: Sat Dec 23, 2006 5:57 am
- Location: North East England
- Has thanked: 127 times
- Been thanked: 70 times
Hopefully a Tekin build
Experience is that marvelous thing that enables you to recognize a mistake when you make it again.
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
- Synergy
- Approved Member
- Posts: 1787
- Joined: Sat Dec 23, 2006 5:57 am
- Location: North East England
- Has thanked: 127 times
- Been thanked: 70 times
I bought these thinking the black wide arms would do the job was I correct http://www.rc10talk.com/viewtopic.php?t=1145
How/where would I get the turnbuckles? thanks.
How/where would I get the turnbuckles? thanks.
Experience is that marvelous thing that enables you to recognize a mistake when you make it again.
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
-
- Approved Member
- Posts: 263
- Joined: Mon Jan 29, 2007 2:27 am
- Been thanked: 2 times
With the Tekin kit, you remove the front plate, including nose tubes, and put the entire thing on the Tekin chassis. So whatever works on the front of an RC10 works on a Tekin chassis.
For the rear, you will need a Stealth tranny (but not the motor plate), hub carriers, tie rods (no change from stock length required), standard length shocks, axles, bearings, inner arm mounts.
If you have a full RC10 w/ Stealth, the Tekin kit comes with everything you need.
For the rear, you will need a Stealth tranny (but not the motor plate), hub carriers, tie rods (no change from stock length required), standard length shocks, axles, bearings, inner arm mounts.
If you have a full RC10 w/ Stealth, the Tekin kit comes with everything you need.
-
- Approved Member
- Posts: 263
- Joined: Mon Jan 29, 2007 2:27 am
- Been thanked: 2 times
- ra272
- Approved Member
- Posts: 312
- Joined: Fri Nov 17, 2006 9:32 am
- Location: NANCY FRANCE
- Been thanked: 7 times
You can still find lots of RC10 parts at Tower Hobbies. For your project, if you want to spend that much money, you can find those parts:
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=ASCC2359&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAV59&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAX30&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=ASCC2359&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAV59&P=7
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAX30&P=7
- Synergy
- Approved Member
- Posts: 1787
- Joined: Sat Dec 23, 2006 5:57 am
- Location: North East England
- Has thanked: 127 times
- Been thanked: 70 times
Thanks for the advice guys that all sounds like good news, I will definitely be putting an order into tower for some of that stuff ra272, I already have a black stealth case on it's way, I will use the wide arms I bought from Mr. FifthScaleRacer and I will dye the rest. Great I won't have a lot left after that, nice and efficient
Experience is that marvelous thing that enables you to recognize a mistake when you make it again.
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
Here's my TC Showroom
http://www.tamiyaclub.com/showroom.asp?id=18028
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1592 Views
-
Last post by Frankentruck
-
- 0 Replies
- 1376 Views
-
Last post by THUNDERSTRIKE1
-
- 24 Replies
- 2044 Views
-
Last post by treehugger
-
- 10 Replies
- 1932 Views
-
Last post by Bugle
-
- 4 Replies
- 739 Views
-
Last post by NomadRacer
-
- 5 Replies
- 970 Views
-
Last post by jwscab
-
- 10 Replies
- 907 Views
-
Last post by Asso_man!
-
- 12 Replies
- 1131 Views
-
Last post by JK Racing
Who is online
Users browsing this forum: DotNetDotCom.org [Bot], Mango, mikea96 and 49 guests