Scored an MRP Pro-110 never assembled, but need help!
- HotRodJosh
- Approved Member
- Posts: 322
- Joined: Fri May 15, 2009 1:55 pm
- Location: Spanaway, Wa
- Has thanked: 3 times
Scored an MRP Pro-110 never assembled, but need help!
Hey fellas, check this out. I just picked up this old MRP kit. I've always dug these MRP cars.
This one is still in all it's original packaging. But it is missing a parts pack. The parts packs are labled with letters and (P) is missing, which has the metal parts for the diff.....plates, outdrives, diff balls, etc. Other wise the kit is complete. Some of the metal parts have some surface rust, but it sould clean up.
I've got a few questions however.
1. The manual says Stage II and the decals say Pro-110. Was the Stage II just an upgraded version of a Pro-110?
2. All the suspension arms, diff case, etc are molded in black. I though all MRP cars had the white, nylon parts???
3. Do I build it? Hahaha......A part of me kinda wants to keep it in the box, but really, what fun is that, right???
This one is still in all it's original packaging. But it is missing a parts pack. The parts packs are labled with letters and (P) is missing, which has the metal parts for the diff.....plates, outdrives, diff balls, etc. Other wise the kit is complete. Some of the metal parts have some surface rust, but it sould clean up.
I've got a few questions however.
1. The manual says Stage II and the decals say Pro-110. Was the Stage II just an upgraded version of a Pro-110?
2. All the suspension arms, diff case, etc are molded in black. I though all MRP cars had the white, nylon parts???
3. Do I build it? Hahaha......A part of me kinda wants to keep it in the box, but really, what fun is that, right???
"I've got a fever, and the only prescription.....is more cowbell."
Pinstriping by Josh
Pinstriping by Josh
- HotRodJosh
- Approved Member
- Posts: 322
- Joined: Fri May 15, 2009 1:55 pm
- Location: Spanaway, Wa
- Has thanked: 3 times
Re: Scored an MRP Pro-110 Stage II never assembled
Also, I just went through the box more and found that the front and rear bumpers are missing.
I thought these all had fiberglass shock towers and chassis', but this kit has all black-anodized aluminum instead of fiberglass...the upper chassis plate is black glass, or maybe graphite??
I thought these all had fiberglass shock towers and chassis', but this kit has all black-anodized aluminum instead of fiberglass...the upper chassis plate is black glass, or maybe graphite??
"I've got a fever, and the only prescription.....is more cowbell."
Pinstriping by Josh
Pinstriping by Josh
- mrlexan
- Approved Member
- Posts: 6251
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 10 times
Re: Scored an MRP Pro-110 Stage II never assembled
1. The best way to tell is the chassis plate. I have only ever seen the SII come with a gold chassis plate and compared to the shorter wheelbase black plate of the Pro-110. My SII has decals that say SII. The pic of the decals you have are for the Pro-110. Yes the SII was upgraded, but there are lots of little differences.HotRodJosh wrote:
1. The manual says Stage II and the decals say Pro-110. Was the Stage II just an upgraded version of a Pro-110?
2. All the suspension arms, diff case, etc are molded in black. I though all MRP cars had the white, nylon parts???
3. Do I build it? Hahaha......A part of me kinda wants to keep it in the box, but really, what fun is that, right???
2. All the Pro-110's I have seen have black parts. The Shotgun and the SII have white parts. I would say with the above and the fact that the parts are black, you probably have a regular Pro-110.
3. That's entirely up to you.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
- HotRodJosh
- Approved Member
- Posts: 322
- Joined: Fri May 15, 2009 1:55 pm
- Location: Spanaway, Wa
- Has thanked: 3 times
Re: Scored an MRP Pro-110 Stage II never assembled
Thanks for the info Mr.Lexan!!! So this is an earlier car then? Or was the Pro-110 and the Stage II available at the same time? The manual looks like it was printed off later.
I plan on building it.....once I locate the missing parts.
I plan on building it.....once I locate the missing parts.
"I've got a fever, and the only prescription.....is more cowbell."
Pinstriping by Josh
Pinstriping by Josh
Re: Scored an MRP Pro-110 Stage II never assembled
wow ive never even seen one before, typed it into goggle and it came up blank, must be rare indeed. i found some mrp boats though.
- mrlexan
- Approved Member
- Posts: 6251
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 10 times
Re: Scored an MRP Pro-110 Stage II never assembled
They were not available at the same time.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
- HotRodJosh
- Approved Member
- Posts: 322
- Joined: Fri May 15, 2009 1:55 pm
- Location: Spanaway, Wa
- Has thanked: 3 times
Re: Scored an MRP Pro-110 Stage II never assembled
Help needed.....because this kit came with a Stage II manual, I'm having slight difficulty assembling it.
Does anyone have a Pro-110 that they could post pics of? Body off? I think I may be missing more parts than I originally thought. I searched but found nuthin' but Stage II pics.....while the rear suspension is about the same, the front is different....
Any help with pics or a copy of the assmbly manual would be GREATLY appreciated.
Thanks!!
Does anyone have a Pro-110 that they could post pics of? Body off? I think I may be missing more parts than I originally thought. I searched but found nuthin' but Stage II pics.....while the rear suspension is about the same, the front is different....
Any help with pics or a copy of the assmbly manual would be GREATLY appreciated.
Thanks!!
"I've got a fever, and the only prescription.....is more cowbell."
Pinstriping by Josh
Pinstriping by Josh
Re: Scored an MRP Pro-110 never assembled, but need help!
Do you still need pictures of a pro 110 or a stage II?
- HotRodJosh
- Approved Member
- Posts: 322
- Joined: Fri May 15, 2009 1:55 pm
- Location: Spanaway, Wa
- Has thanked: 3 times
Re: Scored an MRP Pro-110 never assembled, but need help!
You bet! Pro-110 pics.....close-ups of the front and rear suspension would be great...but anything would help.sk7 wrote:Do you still need pictures of a pro 110 or a stage II?
"I've got a fever, and the only prescription.....is more cowbell."
Pinstriping by Josh
Pinstriping by Josh
Re: Scored an MRP Pro-110 never assembled, but need help!
No problem , will post some pictures tonight.
Re: Scored an MRP Pro-110 never assembled, but need help!
if the car does not have a rediculously high value, i say build it.
xxx,lunchbox,blackfoot,t4,2 rc10ce's,rc10 graphite,rc10 worlds car,2 rc10 t's,xx4---GONE:mip4wdrc10,rpm worlds,houge rc10,super clod,sand scorcher,f103,frog,xxxt,b2,b3,tc3,jrx2,fox,yr4-m2 usa,yz-10 many more LOL
Re: Scored an MRP Pro-110 never assembled, but need help!
Hope these pictures help. These are really interesting buggys. One of my all time favorites.
-
- Approved Member
- Posts: 496
- Joined: Thu Mar 12, 2009 12:32 am
- Location: Ontario, Oregon
- Been thanked: 3 times
Re: Scored an MRP Pro-110 never assembled, but need help!
I saw a bunch racing in seatle when i lived and raced up at some of the old tracks. MRP had a few guys kind of a team deal. I was asked to try one out. i was stupid and said no kinda wished i had i got my ass kicked by a few. they faded away fast.
- HotRodJosh
- Approved Member
- Posts: 322
- Joined: Fri May 15, 2009 1:55 pm
- Location: Spanaway, Wa
- Has thanked: 3 times
Re: Scored an MRP Pro-110 never assembled, but need help!
RAD! Thanks for the pics.....so it looks like there is no upper "link" attached to the spindles...interesting.
Also, all my parts are black, shocks, towers, chassis plates, everything.
SK...is that your rig? I may be asking for more pics as I go....
Also, all my parts are black, shocks, towers, chassis plates, everything.
SK...is that your rig? I may be asking for more pics as I go....
"I've got a fever, and the only prescription.....is more cowbell."
Pinstriping by Josh
Pinstriping by Josh
Re: Scored an MRP Pro-110 never assembled, but need help!
yes its mine , if you need some other pictures let me know also have a stage II if that helps.
brandon.
brandon.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 1379 Views
-
Last post by highwayracer
-
- 5 Replies
- 1411 Views
-
Last post by old_rc_lover
-
- 39 Replies
- 8436 Views
-
Last post by matt1ptkn
-
- 6 Replies
- 2602 Views
-
Last post by matt1ptkn
-
- 3 Replies
- 1646 Views
-
Last post by RedScampi
-
- 54 Replies
- 6962 Views
-
Last post by m_vice
-
- 5 Replies
- 1880 Views
-
Last post by Dr. Robotnik
-
- 2 Replies
- 328 Views
-
Last post by limestang
Who is online
Users browsing this forum: No registered users and 0 guests