Bodies for the '91 RPM Worlds buggy

[badhoopty]

Hoop, it is a bit difficult to tell, but yours looks like an X-Celerator body X-8042, which came on the BK edition. There should be a small scoop on the Drivers side pod on top.... that usually is the dead giveaway, the windows look like a X-Cel though.

no scoop, but if def has different features than asso's xx.

i dunno if anybody ever made a lwb conversion for the xx, but i swear i remember the listing and header card saying something about that. way way back i think i pm'd scr8p the part number, but those pm's are long gone.

i usually keep my header cards, but i dont really keep them all in one place... i'll see if i can dig it up tonight since i'll be going thru some stuff anyway.

btw thats a sweet car dr.r. but you might want to think about using some truck bellcranks since you got the front kicked out.

[scr8p]

hoopty, if you can find the post of your ultra molded car after you mounted the body, i'm almost positive you mentioned it there. i tried looking for it, but i couldn't find it. you did send me a pm about it, too. but, i don't remember the number. i'm pretty sure it was an xx-l, but the A-8008 does sound .....................

[mrlexan]

Per my Losi docs 8008 is the standard XX.... I can't find the PN for the XX-L, I will keep looking. I thought I remembered seeing it.

[templeofspeed]

btw thats a sweet car dr.r. but you might want to think about using some truck bellcranks since you got the front kicked out.

I was gonna say he needs to move the nose back to the short position... I know it means redrilling the tubes and making a cutaway for the front servo mount.

[scr8p]

damn ............. it took me a while, but i found it.

losi xx-l body # a-8040

[mrlexan]

did you find it the forum threads or other documentation?

[scr8p]

i found it in a forum thread. hoopty said that the part number was a-8040.

[badhoopty]

damn ............. it took me a while, but i found it.

losi xx-l body # a-8040

where the heck was it?

it sucks when you KNOW a thread exists and you cant find it...

[shodog]

where can I get an XX body? tower doesn't stock them.

[mrlexan]

Horizon: http://www.horizonhobby.com/Products/Default.aspx?ProdID=LOSA8008

[templeofspeed]

where can I get an XX body? tower doesn't stock them.

http://www.losi.com/Support/

[Dr. Robotnik]

Sorry, my comment was in reference to Dr R's concern over fitting a body to his tub car. Speaking of which... I hadn't noticed his chassis being cut down yet. Can't get the body low that way.

Ah but I think you may be wrong, the reason I picked the Dahm's warrior when it became available was that the side pods of the body go up quite away at the edge. Maybe I can explain better by saying the top of the pods are concave so the edge where the tub would sit is higher than the rest of the pod. Does that make sense?

Probably not. I have a cold you see and didn't trust myself to fit the body this weekend...

Anyway it looks to get pretty low and will be as good as I'd like it.

Sorry for the hijack.

[shodog]

I haven't had much luck on this issue so far. This is a protoform losi ripper body i trimmed up but as you can see the sides are too narrow.

http://www.tcphotos.com/getuserimage.asp?t=n&id=img34_04062007033722_1.jpg

So I dropped by the hobby shop and picked up these vintage beauties.

http://www.tcphotos.com/getuserimage.asp?t=n&id=img34_04062007033722_2.jpg
http://www.tcphotos.com/getuserimage.asp?t=n&id=img34_04062007033722_3.jpg
http://www.tcphotos.com/getuserimage.asp?t=n&id=img34_04062007033722_4.jpg
http://www.tcphotos.com/getuserimage.asp?t=n&id=img34_04062007033722_5.jpg

Before I go slicing and dice, what do you think is going to fit best?

[scr8p]

david put a b2 body on his c.c. worlds car, if i remember right.

that california rattler body looks pretty sweet.

[scr8p]

here's david's. the b2 seems to fit pretty good.