I'm thinking of leaving it bodyless, or just have a few flat pieces of white lexan, tied between the tubes: like a sand rail.RC Chick wrote:asa your not bidding anymore?? what bodies fit on those things? Pretty sweet looking chasis
real racing chassis
- Mr. ED
- Approved Member
- Posts: 5483
- Joined: Thu Dec 21, 2006 1:30 am
- Location: Back @ home: Belgium
- Has thanked: 62 times
- Been thanked: 62 times
Re: real racing chassis
Re: real racing chassis
original panels were vinyl. you can find the ad somewhere here on the website.
as for bidding... there comes a point where you might as well bring this design (the ad has good pictures and all dimensions) to a local welder and have him whip it up. any guy would build a jig and then knock out a bunch of them. a professonal welder who does this for a living could probably have the job done in a couple of weeks. you could probably have this one chassis for 200 or a bunch of them made for under 500, and then start selling them...
hey its not my idea. the guy from encino who started real racing had the idea first
as for bidding... there comes a point where you might as well bring this design (the ad has good pictures and all dimensions) to a local welder and have him whip it up. any guy would build a jig and then knock out a bunch of them. a professonal welder who does this for a living could probably have the job done in a couple of weeks. you could probably have this one chassis for 200 or a bunch of them made for under 500, and then start selling them...
hey its not my idea. the guy from encino who started real racing had the idea first

Re: real racing chassis
I probably shouldn't give this away either, but well I guess this is what this site is about. Anyways, the company is selling Mr. Oliva's whole collection, they said they will be listing the gold wheels that were on this car shortly and lots more after Christmas. So if you guys miss this one, you can buy the other Real Racing Chassis on their website still. 

Re: real racing chassis
Found the original post, very cool.asashaw wrote:original panels were vinyl. you can find the ad somewhere here on the website.
as for bidding... there comes a point where you might as well bring this design (the ad has good pictures and all dimensions) to a local welder and have him whip it up. any guy would build a jig and then knock out a bunch of them. a professonal welder who does this for a living could probably have the job done in a couple of weeks. you could probably have this one chassis for 200 or a bunch of them made for under 500, and then start selling them...
hey its not my idea. the guy from encino who started real racing had the idea first
- Bormac
- Approved Member
- Posts: 3113
- Joined: Wed Sep 05, 2007 3:52 pm
- Location: CENTRAL COAST, NSW AUSTRALIA
- Has thanked: 21 times
- Been thanked: 11 times
Re: real racing chassis
[Found the original post, very cool.[/quote]
CAN I ASK WHERE THE POST IS OR MAYBE A LINK?
CAN I ASK WHERE THE POST IS OR MAYBE A LINK?
Re: real racing chassis
CAN I ASK WHERE THE POST IS OR MAYBE A LINK?[/quote]bormac wrote:[Found the original post, very cool.
I found it doing a google search. Here it is
http://www.rc10talk.com/viewtopic.php?f=7&t=1248
Re: real racing chassis
I watched that thing right down to the wire! It flew up to 500 in a few seconds. Congrats Asa.
Re: real racing chassis
yeah
well when i last looked it was at 230... oh well, someone snuck a bid in there.
Too bad MR. ED... I will decide what to do with the chassis
just kidding.
thanks Chick


Too bad MR. ED... I will decide what to do with the chassis

thanks Chick
- Bormac
- Approved Member
- Posts: 3113
- Joined: Wed Sep 05, 2007 3:52 pm
- Location: CENTRAL COAST, NSW AUSTRALIA
- Has thanked: 21 times
- Been thanked: 11 times
Re: real racing chassis
WAS THAT YOU WHO ONE THAT ASA?
MAN YOU MUST HAVE TOO MUCH MONEY-he he
. BUT SERIOUSLY IVE BEEN WANTING ONE OF THESE CHASSIS FOR AGES. IM CURRENTLY TRYING TO MAKE ONE MYSELF BUT THAT PROJECT ISNT DOING SO WELL. CONGRADULATIONS MATE!


Re: real racing chassis
Well, I been asking about one since I became a member. Were you the second high bidder?
- Bormac
- Approved Member
- Posts: 3113
- Joined: Wed Sep 05, 2007 3:52 pm
- Location: CENTRAL COAST, NSW AUSTRALIA
- Has thanked: 21 times
- Been thanked: 11 times
Re: real racing chassis
NO. I DID TRY TO BID $260 BUT THAT DIDNT EVEN ENTER IN TIME. I MUST HAVE EMAILED THAT SELLER ABOUT 5 TIMES ON TAMIYACLUB ASKING IF HE'D SELL ONE OF THEM. IM SURE THEY ARE COOL TO OWN BUT I JUST DONT HAVE THAT KIND OF MONEY TO SPEND AT THE MOMENT. I AM LOOKING FORWARD TO SEEING WHAT YOU DO WITH IT THOUGH. ANY PLANS??
- mrlexan
- Approved Member
- Posts: 6250
- Joined: Wed Dec 06, 2006 6:49 pm
- Location: Upstate SC
- Been thanked: 12 times
Re: real racing chassis
Where? Link?asashaw wrote: So if you guys miss this one, you can buy the other Real Racing Chassis on their website still.
I am not here cause I am playing photographer and on my mountain bike.
www.gojammedia.com
www.gojammedia.com
- Mr. ED
- Approved Member
- Posts: 5483
- Joined: Thu Dec 21, 2006 1:30 am
- Location: Back @ home: Belgium
- Has thanked: 62 times
- Been thanked: 62 times
Re: real racing chassis
??? when I was talking about how to body it, I was refering to my interest for the ones from mikedealer.asashaw wrote:
Too bad MR. ED... I will decide what to do with the chassisjust kidding.
I never bid or planned to bid. Just in case you ever see mr. ed bidding; my ebay name is not MR. ED ( was already taken)
Re: real racing chassis
i meant if they decide to sell it. inetrc.commrlexan wrote:Where? Link?asashaw wrote: So if you guys miss this one, you can buy the other Real Racing Chassis on their website still.
http://www.inetrc.com/Album/
http://www.inetrc.com/Album/RC10Tube/
REAL RACING has been out of business for a long time, you could try the number on the bottom of their ad... but you might get some old lady

-
- Approved Member
- Posts: 2022
- Joined: Sat Jan 20, 2007 4:41 pm
- Location: Cape Carteret.NC
- Been thanked: 4 times
Re: real racing chassis
I watched just out of curiosity $130.00 with 12 minutes to go then bammmm $577.00 it was a quick draw at the end lol.Glad i wasnt bidding
congrats ASA

Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 965 Views
-
Last post by THUNDERSTRIKE1
-
- 0 Replies
- 2522 Views
-
Last post by LTO_Dave
-
- 2 Replies
- 866 Views
-
Last post by scr8p
-
- 3 Replies
- 2305 Views
-
Last post by Dr. Robotnik
-
- 6 Replies
- 1368 Views
-
Last post by littleVETTE
-
- 3 Replies
- 899 Views
-
Last post by camlchris
-
- 0 Replies
- 2006 Views
-
Last post by mamadoesntletme
-
- 4 Replies
- 1144 Views
-
Last post by jwscab
Who is online
Users browsing this forum: Bing [Bot] and 11 guests