RC10 World's Re-release Revert Project

[shoman24v]

Yes they will fit in have used them before.

Thanks, I may go with a set of those. The B2 still used the smaller diameter rear wheels?

[mikea96]

It was the 2.175 rear wheel same as the rc10 worlds I believe but for 3/16 axle.

[shoman24v]

It was the 2.175 rear wheel same as the rc10 worlds I believe but for 3/16 axle.

Perfect, I will do this upgrade then.

[shoman24v]

Got these on order:

Now to find original B2 rear wheels and the project should be done and ready for electronics!

RC10B2 axles:


Rear tires:

[mikea96]

You can use the yellow ones you have those tiresame are made for 2.15 to 2.2 wheels.

[shoman24v]

You can use the yellow ones you have those tiresame are made for 2.15 to 2.2 wheels.

Ya, I know they'll fit. Could be a little tight?

The guy who had the wheels, actually had B2 2.1 rear wheels... so I went ahead and got them. I guess the project is now a mix of revert, and B2. I'm okay with that

[shoman24v]

Well, I'd say she's about 95% done. I still have some fine details to finish on the car: Bearings in the steering, cut the rear bulkhead, washers for the transmission to chassis connection, better aluminum screws, electronics, paint, and some other odd's and ends. Overall, I'm very pleased.

[mikea96]

Looks good!

[shoman24v]

Thanks!!

[Vale]

Great job!

I would use Lunsford retro turnbuckles + white, squared ball cups

Cheers,
Daniel

[shoman24v]

Great job!

I would use Lunsford retro turnbuckles + white, squared ball cups

Cheers,
Daniel

I hear ya on that... But not sure I want to spend more money for stuff like that lol. Are those even period correct for the car?

Here's more progress:

[mikea96]

Looks good!

[shoman24v]

My first official paint job

[mikea96]

Very nice!

[shoman24v]

Thanks!!