Front end protection available!
Re: Front end protection available!
I emailed RPM a few months back about arm mounts, they told me most of their molds are recycled when demand for parts goes away. They also said they have a few old molds that were kept and they would be "evaluating the market for possible re-releases". I guess the bumper means they can make short runs of some parts for people like us, I just don't understand why they didn't just release them in dyeable white only.
Hopefully they've got a few more molds sitting around, like maybe worlds arms front and rear!?
Hopefully they've got a few more molds sitting around, like maybe worlds arms front and rear!?
Mark
Aaaaahhhh crap! I'm about to get passed by that orange truck!
Aaaaahhhh crap! I'm about to get passed by that orange truck!
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: Front end protection available!
X2, YES...markt311 wrote: Hopefully they've got a few more molds sitting around, like maybe worlds arms front and rear!?
- scr8p
- Administrator
- Posts: 16521
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 28 times
- Been thanked: 955 times
Re: Front end protection available!
good luck with THAT one.................m_vice wrote:X2, YES...markt311 wrote: Hopefully they've got a few more molds sitting around, like maybe worlds arms front and rear!?
Re: Front end protection available!
I can always dream
Mark
Aaaaahhhh crap! I'm about to get passed by that orange truck!
Aaaaahhhh crap! I'm about to get passed by that orange truck!
Re: Front end protection available!
Lets hope tower start selling them so everyone else in the world can get them
- DerbyDan
- Approved Member
- Posts: 1836
- Joined: Tue Sep 08, 2009 8:04 am
- Location: Northampton UK
- Has thanked: 2 times
- Been thanked: 17 times
Re: Front end protection available!
LOL! I just went through (all excited) the process of ordering the bumper & a few other bits..... track rod ends etc..... added all my details, then I got to the shipping details then I realised they only ship within the USA Oh wellBugle wrote:Lets hope tower start selling them so everyone else in the world can get them
My T.C Showroom; http://www.tamiyaclub.com/member.asp?id=28990
-
- Approved Member
- Posts: 585
- Joined: Wed Nov 22, 2006 2:32 pm
- Location: Bas St-Laurent, Canada
Re: Front end protection available!
I whish someone in the states should make an order for all of us and dispatch the parts... It would make it a large order and may motivate RPM to keep this part alive....
-
- Approved Member
- Posts: 585
- Joined: Wed Nov 22, 2006 2:32 pm
- Location: Bas St-Laurent, Canada
Re: Front end protection available!
Great news. I asked if this part was to stay there for a while
Here is the answer.
Yes, they will still be available for a while. We have approximately 1,000 still in stock so it'll be a couple of years before they're gone for good.
I replied asking for more parts (gear cover, suspension arms...)
Here is the answer.
Yes, they will still be available for a while. We have approximately 1,000 still in stock so it'll be a couple of years before they're gone for good.
I replied asking for more parts (gear cover, suspension arms...)
-
- Approved Member
- Posts: 585
- Joined: Wed Nov 22, 2006 2:32 pm
- Location: Bas St-Laurent, Canada
Re: Front end protection available!
Ok bad news. Got another email. They will not produce any other RC10 parts. Not enough sales.
- jdenison75
- Approved Member
- Posts: 41
- Joined: Sat Jan 09, 2010 7:43 pm
- Location: oklahoma
Re: Front end protection available!
thats a bummer they arent going to make any more. Wonder if they would sell the molds instead of scraping em?
- scottmac74
- Approved Member
- Posts: 108
- Joined: Sat Dec 27, 2008 10:06 pm
- Location: Midway, GA (Near Savannah)
Re: Front end protection available!
I just ordered my front bumper from them, black is ok by me it matches my gear cover
BTW, if you need the plug for the gear cover. You have to contact RPM directly, the plugs are not available through Shopatron. I just ordered 3, and it cost me $3.25 ($0.75 ea. for the plugs and $1.00 for postage).
BTW, if you need the plug for the gear cover. You have to contact RPM directly, the plugs are not available through Shopatron. I just ordered 3, and it cost me $3.25 ($0.75 ea. for the plugs and $1.00 for postage).
III
- bully
- Approved Member
- Posts: 759
- Joined: Mon May 31, 2010 6:08 am
- Location: Perth W.A Australia
- Been thanked: 6 times
Re: Front end protection available!
Found these bumpers for sale at rc mart, for those of us unable to buy direct from RPM
-
- Approved Member
- Posts: 748
- Joined: Wed Aug 26, 2009 3:43 pm
- Location: Syracuse, NY
- Has thanked: 1 time
- Been thanked: 2 times
Re: Front end protection available!
Canada is 'international' shipping, which automatically cranks up the shipping costs, with customs, tariffs, etc. It's almost double to just mail a letter. I know a guy who just released a wrestling interview DVD, and he said it's more complicated than just addressing the package to Canada and paying a little more, there are all kinds of rules about it.
Injection molds are tremendously expensive to make, in the thousands and possibly tens of thousands, and they are usually custom fit for a particular type of machine. The mold itself is a big block of metal with the void areas machined into it, so they probably took the old molds and machined them for a different part.
Molds also wear out over time, so the quality of the parts degrades. Plastic model companies are reissuing many old kits over the past few years because new molds are so expensive to tool up, and the quality can be really bad, with lots of flashing and misaligned parts.
In this hobby if you want something, don't wait to buy it, especially if it's a reissued part. Even new products can have a limited run for one reason or another. Pro-Line has had a bunch of officially licensed bodies that they stopped selling after a short period of time (Silverado with the bed cap, Jeep Wrangler, etc), so with the new Cherokee and others I'm going to get one now and sticking it on a shelf.
Injection molds are tremendously expensive to make, in the thousands and possibly tens of thousands, and they are usually custom fit for a particular type of machine. The mold itself is a big block of metal with the void areas machined into it, so they probably took the old molds and machined them for a different part.
Molds also wear out over time, so the quality of the parts degrades. Plastic model companies are reissuing many old kits over the past few years because new molds are so expensive to tool up, and the quality can be really bad, with lots of flashing and misaligned parts.
In this hobby if you want something, don't wait to buy it, especially if it's a reissued part. Even new products can have a limited run for one reason or another. Pro-Line has had a bunch of officially licensed bodies that they stopped selling after a short period of time (Silverado with the bed cap, Jeep Wrangler, etc), so with the new Cherokee and others I'm going to get one now and sticking it on a shelf.
Re: Front end protection available!
4-5 years ago i was on the phone with them and the worlds molds are long gone. and they are not coming back. dynotech is the only place to get replacement worlds arms.markt311 wrote:
Hopefully they've got a few more molds sitting around, like maybe worlds arms front and rear!?
- RichieRich
- Approved Member
- Posts: 2351
- Joined: Wed Jun 14, 2006 11:42 pm
- Location: Los Angeles, CA
- Has thanked: 34 times
- Been thanked: 19 times
Re: Front end protection available!
I just ordered 5 of these and they came without a header card or bag. All were in perfect condition though.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 865 Views
-
Last post by bully
-
- 10 Replies
- 825 Views
-
Last post by klavy69
-
- 4 Replies
- 764 Views
-
Last post by jwscab
-
- 2 Replies
- 662 Views
-
Last post by cautrell05
-
- 2 Replies
- 700 Views
-
Last post by PBR Allstar
-
- 6 Replies
- 758 Views
-
Last post by frgna
-
- 13 Replies
- 1803 Views
-
Last post by KScanvas
-
- 2 Replies
- 407 Views
-
Last post by tulsa
Who is online
Users browsing this forum: CommonCrawl [Bot], Facebook [Bot] and 4 guests