Just correct me if im wrong but If I buy a set of turnbuckles and ends. One end needs to be normal threads and the other reversed threads to go on the turnbuckle.
I got a set of normal and reverse thread ends but it appears all the reverse threads...
Last post
Haha, decent tools I do not have.
A must have, in any shop!!
I'm not sure what you all are using for turnbuckles but I was in the market for some for my Team Car rebuild. I'm far too cheap to buy anything titanium, nor am I a good enough driver to make use of any performance gains. I wanted something a tiny...
Last post
Not to be the bearer of bad news, but I believe that you'll find that you have an interference problem between these ball cups. Move the steering as you compress the suspension.
Hi all, just wanted to know if someone can flick me the standard lengths of turnbuckles for the YZ870c, works 91/93...I have a rough idea but know you guys know exactly what they are. Is it 42mm for the 91/93..pretty sure they are all the same size...
Anybody know of a set of turnbuckles besides the blue team ones?I'm not going for originality,but don't really want all the blue stuff.
I've been searching but can't seem to come up with anything
Last post
Turnbuckles are still available on the Team Associated website (Blue or Black, I just ordered a set of the black). Just search for the part number (#7254 for the black turnbuckle set). If you Google RC10T2 Parts List Petit RC has a full parts list...
picked up a set that says for T2/GT/T3. It is the punished series. When I compare the length they are shorter then my current ones. I was under the impression that the gt and T2 are the same lenght as the 10T..
Last post
....the new set has two diff length. 4 rods are 2-5/8 and two are 2-3/4.
The technacraft I pulled out my box are SHORTER then the all four 2-5/8 by 1/8. Not really much but a 1/4 shorter then the longer two. I'm. Thinking the longer two are good...
Amazon [Bot],