Brushed motor batteries and charger questions

Brushed, nicad, radios, etc...

Moderators: scr8p, klavy69

DonDDR
Regular Member
Posts: 25
Joined: Tue Sep 14, 2010 4:29 pm
Location: USA

Brushed motor batteries and charger questions

Post by DonDDR »

The 10T I just bought has a brushed motor but no batteries or charger. What am I looking for to make my car run? New to this and have no clue.



Thnanks.

User avatar
floodx
Approved Member
Posts: 70
Joined: Tue May 11, 2010 8:27 am
Location: WV

Re: Brushed motor batteries and charger questions

Post by floodx »

Need to know what ESC you have... but there is 3 primary choices battery types Lipo, NiMH and NiCd. Most retail newer chargers charge all 3. Older chargers may only charge NiMH and NiCd. Lipos are by far the best battery choice of the 3 but cost a little more (in my opinion worth every penny).

Basic options for batteries are volts and mah - this is where what ESC you have is important - standard is 7.2V for a 6-cell NiMH/NiCd (7.4V for a 2S lipos) however more cells = more voltage (some ESCs cannot handle higher voltages - mine only handles up to 8.4V for example) and up to 10,000 mah. Higher the mah usually the longer the run time - however may be harder on your motor (i.e. heat).

If your just starting out and buying both new I would suggest a multi charger (that chargers all three battery types) and a 2S 7.4V Lipo in the neighborhood of 2000-3000 mah. I run a 3300 mah 2S Lipo with a 15T brushed motor and geared 18/87 on a SC10 transmission and get 30min runtimes easy and plenty of performance on hilly loose dirt track.

Hope this helps
HH TQ10

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Vintage Electronics”

Who is online

Users browsing this forum: No registered users and 7 guests