I have these two bodies I would like to paint up. I will be just screwing around on asphalt for fun so I am thinking rubbber tires but really don't have a clue. I am an offroad guy and just looking for a cheap option, something I could get easy parts for and not expensive. I have plenty of motors, radios etc.
All modern pan car stuff is narrow chassis for oval as touring cars have completely replaced 10th scale pan road racing. World GT is an attempt to bring it back, but it is also narrow.
What you want is a non-super speedway RC10L. They pop up from time to time on the bay.
Be sure to check the width of those bodies at the rear wheel wells - some Bolink bodies are 225 or 230 mm wide, which may be too narrow for a wide RC10L depending on what rear axle is used (most put the car at 230-235 mm wide)
Is there any interest in these anymore or have they died off? I found a couple of nice old 1/10 wide bodies but don't really want to cut them up. I found an old Andy's 962 Porshe GTP, an old Frewer Jag XJR6 and a Frewer 962 of some sort that has...
Last post
Here's the Andy's 962 GTP that I have. It's a bit over the top but different.
I thought of this a little while ago. Finally got around to making it. To protect the front end of your graphite chassis, take an aluminum nose and cut the front angle off. Then, you'll need to cut about 1/8 or maybe a little less off the front of...
Last post
the only nose plates they still have are the green ones for the rc10t. they are in the discounted items section. $3.00 :wink:
I travel a lot of work and I have this habit of looking at CL for RC's, Trans Am parts, and slot car stuff. This always gets me on my wife's poop list, she likes when I actually sell some of this stuff though.
Anyhow, I spotted a make an offer ad...
Last post
I so love the RC10 Worlds cars! 8)
It looks like you did a great job putting this one back together (even if it isn't a correct restoration) instead of selling the parts on eBay. Good for you! If you're willing to tell us, what did the $29 car...
I'm new to this site. I have 2 Gold Tub rollers that I thought I'd try to sell, But after looking this over, I may keep 'em! Does anyone know if the Sprint car bodies Bolink made to fit this chassis are available anywhere? Or if a similar body is...
Last post
Np I have been talking to them on and off for the last few weeks and I have to admitt the customer service is great. I always get a answer kind ?? curdies?? spelling. Any how good folks over there but I have yet to order anything
I'm wanting to upgrade my gold shocks on my original Team RC10 to threaded shock bodies.
Does anybody know what part numbers would work for front and rear?
Thanks!
Last post
I think mine are defective. Holes not correctly drilled into shock body. I wonder if I can fix them by just drilling them out or does that bevel need to be perfect for an o-ring to ride in there- or maybe the o-ring doesn't need a bevel?
Hi, need some help with this pan car. I have always wanted one and pulled the trigger on this one. I think it is an Accoiated RC10LSS. Anybody know for sure? Its complete and in decent running shape but needs a refresh. I am going to have to replace...
Last post
You can use some cap head screws to pre tap the tweak screw holes. Just don’t go too crazy as you want them to be snug in there.
Did that several times and no luck. Took them to the wire wheel on the bench grinder and they go in smoothly now....