Hi guys,
I was checking out the RC10 set up sheets at the AE website and, well...they suck. Not detailed enough for all the options for the RC10.
Has anyone here designed a better setup sheet?
Please share.
Other than PETITRC - which seems kinda limited....
Wondering if anyone here who might still race their vintage cars has any Setup sheets or if there is a dedicated thread for SETUPS only?
I tried searching for something Sticky, but no real Setups...
Last post
My only contribution to this entire site....and you missed it :(
Anybody seen these before?
The pic was swiped from an ebay auction. If anybody has one they could scan, or wins the auction and could scan it I would be grateful.
Last post
April '89. The writer was a little harsh on Losi back then I think. I mean c'mon, the thing was completely new and of course it would have issues.
I've seen a couple of sites that link to three setup sheets for the RC10GT . All three links are currently 404. The Wayback Machine has nothing... If someone could be so kind as to check if they have these files saved local? I called up Team...
Last post
Read this:
You will understand RC10GT set up on your own, and gives you a great baseline! :wink:
i found a few setup sheets for the b3. i'll be giving these to arn0 over at petitrc. if he makes any changes to any or puts them in pdf form i'll update this thread.
team associated b3 setup sheet from the rear of the instruction manual
team...
Last post
More information about the creation of these setup sheets.
The drawings were done in Micrographx Designer (before Adobe Illustrator was around).
The top B3 setup layout was created in Aldus PageMaker (before Adobe InDesign was around).
Anybody have a good photo library of model by model decal sheets, for rc10's. I would love to see what the very first sheets looked like through the early CE's (pre stealth). even a TQ-10. But a complete run down would be even better.
Hi i have a stealth tranny in a graphite chassis and i dontwhich kv to run.i know i want to use a 2cell lipo was thinking 2800 or 3800. I want to race if i find a vintage class or atleast have a car that can keep up with the run what you bring race....
Hey folk. Almost done with my RC10 rebuild but struggling with the vintage electronics. Any tips to trouble shoot it. Problem is I don’t have any known gear to test with. I’ve got here.
7.2 V nimh battery - charged
Futaba FP-R112JE receiver
Futaba...
Last post
I bought several sets of similar looking crystals off eBay, NIP labeled from Performance Devices . I'm not sure what they are designed/intended for, but I couldn't get a single set to work in any of my 75 MHz systems. I'd bet those crystals are the...
